You are not logged in.
Pages: 1
where can i find yaourt and multilib in pacman.conf. its not there? please advise
Offline
sorry what meant was i cant install yaourt, and in pacman.conf multilib is not there
Offline
multilib is there to keep 32-bit libraries for 64-bit Archlinux, it doesn't make sense on Archlinux32.
About yaourt:
[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch
But, this is an unofficial repository. At the moment it still contains i686 and ARM binaries.
If this fails, download the tarballs for package-query and yaourt directly from the AUR:
https://aur.archlinux.org/cgit/aur.git/ … ery.tar.gz
https://aur.archlinux.org/cgit/aur.git/ … urt.tar.gz
untar them, build first package-query with makepkg -si, then yaourt.
Offline
sorry for such a new question but how do i untar them and do i put those links in pacman.conf?
Offline
Maybe misleading: either use pacman and add the archlinuxfr repo to '/etc/pacman.conf'
and do a pacman -S yaourt.
[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch
If this doesn't work build package-query and yaourt by hand as follows:
wget https://aur.archlinux.org/cgit/aur.git/ … ery.tar.gz
tar xf package-query.tar.gz
cd package-query
makepkg -si
cd ..
https://aur.archlinux.org/cgit/aur.git/ … urt.tar.gz
tar xf yaourt.tar.gz
cd yaourt
makepkg -si
cd ..
Offline
Hello, I can not install the package-kery tarball as yaourt, this throws me the console:
$ sudo pacman -Sy yaourt
:: Synchronizing the databases of the packages ...
core is updated
extra is updated
community is updated
archlinuxfr is up to date
resolving dependencies ...
warning: could not resolve «package-query> = 1.8», a dependency of «yaourt»
:: The following package can not be updated due to dependencies that could not be resolved:
yaourt
:: Do you want to skip the following package for this update? [s/N]
error: the operation could not be prepared (the dependencies could not be satisfied)
:: yaourt: needs package-query> = 1.8 It is also a new installation and I have everything updated completely.
It does not let me install anything with the subject of pgp signatures ... I'm blocked.
Thank you
Offline
warning: could not resolve «package-query> = 1.8», a dependency of «yaourt»
You need to install package-query in order to use yaourt. Use the above instructions from abaumann to compile and install it.
It does not let me install anything with the subject of pgp signatures ... I'm blocked.
What error are you getting? Probably, you need to upgrade archlinux32-keyring first, because it contains my new package signing key.
regards,
deep42thought
Offline
/var/log/Xorg.O.log
[ 19.513] X Protocol Version 11, Revision 0
[ 19.513] Build Operating System: Linux 4.15.15-1-ARCH i686
[ 19.513] Current Operating System: Linux Arch 4.15.15-1.0-ARCH #1 SMP PREEMPT Fri Apr 6 15:10:59 CEST 2018 i686
[ 19.513] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8593562a-e6fb-4a2a-a85b-fde81f543227 rw quiet
[ 19.513] Build Date: 12 April 2018 01:32:29PM
[ 19.513]
[ 19.513] Current version of pixman: 0.34.0
[ 19.513] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.513] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.514] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 23 14:50:11 2018
[ 19.618] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.618] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.758] (==) No Layout section. Using the first Screen section.
[ 19.758] (==) No screen section available. Using defaults.
[ 19.758] (**) |-->Screen "Default Screen Section" (0)
[ 19.758] (**) | |-->Monitor "<default monitor>"
[ 19.774] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.774] (==) Automatically adding devices
[ 19.774] (==) Automatically enabling devices
[ 19.774] (==) Automatically adding GPU devices
[ 19.774] (==) Automatically binding GPU devices
[ 19.775] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 19.947] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 19.947] Entry deleted from font path.
[ 19.971] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.971] Entry deleted from font path.
[ 19.971] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.980] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.980] Entry deleted from font path.
[ 19.980] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.980] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 19.980] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.980] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.045] (II) Loader magic: 0x6a16c0
[ 20.045] (II) Module ABI versions:
[ 20.045] X.Org ANSI C Emulation: 0.4
[ 20.045] X.Org Video Driver: 23.0
[ 20.045] X.Org XInput driver : 24.1
[ 20.045] X.Org Server Extension : 10.0
[ 20.048] (++) using VT number 1
[ 20.048] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 20.051] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.096] (--) PCI:*(0:0:2:0) 8086:27ae:1025:022f rev 3, Mem @ 0x56280000/524288, 0x40000000/268435456, 0x56300000/262144, I/O @ 0x000050f0/8, BIOS @ 0x????????/131072
[ 20.096] (--) PCI: (0:0:2:1) 8086:27a6:1025:022f rev 3, Mem @ 0x56200000/524288
[ 20.096] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.096] (II) LoadModule: "glx"
[ 20.161] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.278] (II) Module glx: vendor="X.Org Foundation"
[ 20.278] compiled for 1.19.6, module version = 1.0.0
[ 20.278] ABI class: X.Org Server Extension, version 10.0
[ 20.278] (==) Matched intel as autoconfigured driver 0
[ 20.278] (==) Matched intel as autoconfigured driver 1
[ 20.278] (==) Matched modesetting as autoconfigured driver 2
[ 20.278] (==) Matched fbdev as autoconfigured driver 3
[ 20.278] (==) Matched vesa as autoconfigured driver 4
[ 20.279] (==) Assigned the driver to the xf86ConfigLayout
[ 20.279] (II) LoadModule: "intel"
[ 20.317] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.455] (II) Module intel: vendor="X.Org Foundation"
[ 20.455] compiled for 1.19.6, module version = 2.99.917
[ 20.455] Module class: X.Org Video Driver
[ 20.455] ABI class: X.Org Video Driver, version 23.0
[ 20.455] (II) LoadModule: "modesetting"
[ 20.456] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.471] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.472] compiled for 1.19.6, module version = 1.19.6
[ 20.472] Module class: X.Org Video Driver
[ 20.472] ABI class: X.Org Video Driver, version 23.0
[ 20.472] (II) LoadModule: "fbdev"
[ 20.473] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.483] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.484] compiled for 1.19.5, module version = 0.4.4
[ 20.484] Module class: X.Org Video Driver
[ 20.484] ABI class: X.Org Video Driver, version 23.0
[ 20.484] (II) LoadModule: "vesa"
[ 20.487] (WW) Warning, couldn't open module vesa
[ 20.487] (II) UnloadModule: "vesa"
[ 20.487] (II) Unloading vesa
[ 20.487] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 20.487] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 20.490] (II) intel: Driver for Intel(R) HD Graphics
[ 20.490] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 20.490] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 20.490] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.490] (II) FBDEV: driver for framebuffer: fbdev
[ 20.528] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171023
[ 20.528] (II) intel(0): SNA compiled from 2.99.917-823-gd9bf46e4
[ 20.623] (WW) Falling back to old probe method for modesetting
[ 20.623] (WW) Falling back to old probe method for fbdev
[ 20.623] (II) Loading sub module "fbdevhw"
[ 20.624] (II) LoadModule: "fbdevhw"
[ 20.624] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.643] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.643] compiled for 1.19.6, module version = 0.0.2
[ 20.643] ABI class: X.Org Video Driver, version 23.0
[ 20.645] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 20.645] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 1 threads
[ 20.646] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.646] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.646] (==) intel(0): RGB weight 888
[ 20.646] (==) intel(0): Default visual is TrueColor
[ 20.648] (II) intel(0): Output LVDS1 has no monitor section
[ 20.650] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 20.650] (II) intel(0): Enabled output LVDS1
[ 20.650] (II) intel(0): Output VGA1 has no monitor section
[ 20.651] (II) intel(0): Enabled output VGA1
[ 20.651] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 20.652] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 20.652] (II) intel(0): Enabled output VIRTUAL1
[ 20.652] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1
[ 20.652] (==) intel(0): TearFree disabled
[ 20.652] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.652] (==) intel(0): DPI set to (96, 96)
[ 20.652] (II) Loading sub module "dri3"
[ 20.652] (II) LoadModule: "dri3"
[ 20.653] (II) Module "dri3" already built-in
[ 20.653] (II) Loading sub module "dri2"
[ 20.653] (II) LoadModule: "dri2"
[ 20.653] (II) Module "dri2" already built-in
[ 20.653] (II) Loading sub module "present"
[ 20.653] (II) LoadModule: "present"
[ 20.653] (II) Module "present" already built-in
[ 20.653] (II) UnloadModule: "modesetting"
[ 20.653] (II) Unloading modesetting
[ 20.653] (II) UnloadModule: "fbdev"
[ 20.653] (II) Unloading fbdev
[ 20.654] (II) UnloadSubModule: "fbdevhw"
[ 20.654] (II) Unloading fbdevhw
[ 20.654] (==) Depth 24 pixmap format is 32 bpp
[ 20.683] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 20.683] (==) intel(0): Backing store enabled
[ 20.683] (==) intel(0): Silken mouse enabled
[ 20.704] (II) intel(0): HW Cursor enabled
[ 20.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.708] (==) intel(0): DPMS enabled
[ 20.708] (==) intel(0): Display hotplug detection enabled
[ 20.710] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 20.710] (II) intel(0): [DRI2] Setup complete
[ 20.710] (II) intel(0): [DRI2] DRI driver: i915
[ 20.710] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 20.710] (II) intel(0): direct rendering: DRI2 enabled
[ 20.710] (II) intel(0): hardware support for Present enabled
[ 20.710] (--) RandR disabled
[ 21.027] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.027] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.027] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.027] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 21.027] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.027] (II) AIGLX: enabled GLX_SGI_swap_control
[ 21.027] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 21.027] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 21.027] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 21.027] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.028] (II) AIGLX: Loaded and initialized i915
[ 21.028] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.038] (II) intel(0): switch to mode 1024x600@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 21.050] (II) intel(0): Setting screen physical size to 270 x 158
[ 21.837] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.837] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.837] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.837] (II) LoadModule: "libinput"
[ 21.838] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.906] (II) Module libinput: vendor="X.Org Foundation"
[ 21.906] compiled for 1.19.6, module version = 0.27.1
[ 21.906] Module class: X.Org XInput Driver
[ 21.906] ABI class: X.Org XInput driver, version 24.1
[ 21.906] (II) Using input driver 'libinput' for 'Power Button'
[ 21.906] (**) Power Button: always reports core events
[ 21.906] (**) Option "Device" "/dev/input/event3"
[ 21.907] (**) Option "_source" "server/udev"
[ 21.909] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 21.909] (II) event3 - Power Button: device is a keyboard
[ 21.909] (II) event3 - Power Button: device removed
[ 21.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 21.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.915] (**) Option "xkb_layout" "es"
[ 22.064] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 22.064] (II) event3 - Power Button: device is a keyboard
[ 22.067] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 22.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.068] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 22.068] (**) Video Bus: Applying InputClass "system-keyboard"
[ 22.068] (II) Using input driver 'libinput' for 'Video Bus'
[ 22.068] (**) Video Bus: always reports core events
[ 22.068] (**) Option "Device" "/dev/input/event4"
[ 22.068] (**) Option "_source" "server/udev"
[ 22.071] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 22.071] (II) event4 - Video Bus: device is a keyboard
[ 22.071] (II) event4 - Video Bus: device removed
[ 22.088] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 22.088] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 22.088] (**) Option "xkb_layout" "es"
[ 22.092] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 22.092] (II) event4 - Video Bus: device is a keyboard
[ 22.095] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 22.095] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.095] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 22.095] (**) Power Button: Applying InputClass "system-keyboard"
[ 22.095] (II) Using input driver 'libinput' for 'Power Button'
[ 22.095] (**) Power Button: always reports core events
[ 22.095] (**) Option "Device" "/dev/input/event0"
[ 22.096] (**) Option "_source" "server/udev"
[ 22.098] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 22.098] (II) event0 - Power Button: device is a keyboard
[ 22.098] (II) event0 - Power Button: device removed
[ 22.104] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 22.104] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 22.104] (**) Option "xkb_layout" "es"
[ 22.107] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 22.107] (II) event0 - Power Button: device is a keyboard
[ 22.110] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 22.111] (II) No input driver specified, ignoring this device.
[ 22.111] (II) This device may have been added with another device file.
[ 22.113] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 22.113] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 22.113] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 22.113] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 22.113] (II) Using input driver 'libinput' for 'Sleep Button'
[ 22.114] (**) Sleep Button: always reports core events
[ 22.114] (**) Option "Device" "/dev/input/event2"
[ 22.114] (**) Option "_source" "server/udev"
[ 22.116] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 22.116] (II) event2 - Sleep Button: device is a keyboard
[ 22.117] (II) event2 - Sleep Button: device removed
[ 22.122] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 22.122] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 22.122] (**) Option "xkb_layout" "es"
[ 22.126] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 22.126] (II) event2 - Sleep Button: device is a keyboard
[ 22.130] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 22.130] (II) No input driver specified, ignoring this device.
[ 22.130] (II) This device may have been added with another device file.
[ 22.133] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[ 22.133] (II) No input driver specified, ignoring this device.
[ 22.133] (II) This device may have been added with another device file.
[ 22.135] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[ 22.135] (II) No input driver specified, ignoring this device.
[ 22.136] (II) This device may have been added with another device file.
[ 22.140] (II) config/udev: Adding input device WebCam: USB Camera (/dev/input/event10)
[ 22.140] (**) WebCam: USB Camera: Applying InputClass "evdev keyboard catchall"
[ 22.140] (**) WebCam: USB Camera: Applying InputClass "libinput keyboard catchall"
[ 22.140] (**) WebCam: USB Camera: Applying InputClass "system-keyboard"
[ 22.140] (II) Using input driver 'libinput' for 'WebCam: USB Camera'
[ 22.140] (**) WebCam: USB Camera: always reports core events
[ 22.140] (**) Option "Device" "/dev/input/event10"
[ 22.140] (**) Option "_source" "server/udev"
[ 22.144] (II) event10 - WebCam: USB Camera: is tagged by udev as: Keyboard
[ 22.144] (II) event10 - WebCam: USB Camera: device is a keyboard
[ 22.144] (II) event10 - WebCam: USB Camera: device removed
[ 22.161] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input12/event10"
[ 22.161] (II) XINPUT: Adding extended input device "WebCam: USB Camera" (type: KEYBOARD, id 10)
[ 22.161] (**) Option "xkb_layout" "es"
[ 22.165] (II) event10 - WebCam: USB Camera: is tagged by udev as: Keyboard
[ 22.165] (II) event10 - WebCam: USB Camera: device is a keyboard
[ 22.169] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 22.169] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 22.169] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 22.169] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 22.170] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 22.170] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.170] (**) Option "Device" "/dev/input/event5"
[ 22.170] (**) Option "_source" "server/udev"
[ 22.173] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 22.173] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 22.173] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 22.179] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 22.179] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 22.179] (**) Option "xkb_layout" "es"
[ 22.183] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 22.183] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 22.187] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 22.187] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 22.187] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 22.187] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 22.187] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 22.187] (II) LoadModule: "synaptics"
[ 22.188] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22.205] (II) Module synaptics: vendor="X.Org Foundation"
[ 22.205] compiled for 1.19.0, module version = 1.9.0
[ 22.205] Module class: X.Org XInput Driver
[ 22.205] ABI class: X.Org XInput driver, version 24.1
[ 22.205] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 22.205] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.205] (**) Option "Device" "/dev/input/event11"
[ 22.230] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 22.230] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 121)
[ 22.230] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5218 (res 182)
[ 22.230] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 22.230] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 22.230] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 22.230] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 22.231] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.231] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.251] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 22.251] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 22.251] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 22.251] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 22.251] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[ 22.252] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 22.252] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 22.252] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 22.252] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 22.253] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.255] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 22.256] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 22.258] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 22.258] (II) No input driver specified, ignoring this device.
[ 22.258] (II) This device may have been added with another device file.
[ 22.653] (II) intel(0): EDID vendor "CMO", prod id 4100
[ 22.653] (II) intel(0): Printing DDC gathered Modelines:
[ 22.653] (II) intel(0): Modeline "1024x600"x0.0 48.08 1024 1089 1133 1264 600 604 609 634 -hsync -vsync (38.0 kHz eP)
[ 56.062] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse1)
[ 56.062] (II) No input driver specified, ignoring this device.
[ 56.062] (II) This device may have been added with another device file.
[ 56.166] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event12)
[ 56.166] (**) SIGMACHIP Usb Mouse: Applying InputClass "evdev pointer catchall"
[ 56.166] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[ 56.166] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[ 56.166] (**) SIGMACHIP Usb Mouse: always reports core events
[ 56.166] (**) Option "Device" "/dev/input/event12"
[ 56.166] (**) Option "_source" "server/udev"
[ 56.222] (II) event12 - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 56.222] (II) event12 - SIGMACHIP Usb Mouse: device is a pointer
[ 56.223] (II) event12 - SIGMACHIP Usb Mouse: device removed
[ 56.245] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1C4F:0034.0001/input/input13/event12"
[ 56.245] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 13)
[ 56.248] (**) Option "AccelerationScheme" "none"
[ 56.250] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[ 56.250] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[ 56.250] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[ 56.305] (II) event12 - SIGMACHIP Usb Mouse: is tagged by udev as: Mouse
[ 56.305] (II) event12 - SIGMACHIP Usb Mouse: device is a pointer $ dmesg
[ 0.000000] Linux version 4.15.15-1.0-ARCH (builduser@slave) (gcc version 7.3.1 20180312 (GCC)) #1 SMP PREEMPT Fri Apr 6 15:10:59 CEST 2018
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f575fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f576000-0x000000003f5befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003f5bf000-0x000000003f66cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f66d000-0x000000003f6befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003f6eefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f6ef000-0x000000003f6fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f6ff000-0x000000003f6fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Acer Aspire one /Aspire one , BIOS V1.06 06/11/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f700 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect
[ 0.000000] 1 base 0FFFC0000 mask 0FFFE0000 uncachable
[ 0.000000] 2 base 000000000 mask 0E0000000 write-back
[ 0.000000] 3 base 020000000 mask 0E0000000 write-back
[ 0.000000] 4 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 5 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 base 000000000 mask 0FFFE0000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1bffffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.000000] BRK [0x1bb63000, 0x1bb63fff] PGTABLE
[ 0.000000] BRK [0x1bb64000, 0x1bb65fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37304000-0x37979fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x36188000-0x367fd87f]
[ 0.000000] Move RAMDISK from [mem 0x37304000-0x3797987f] to [mem 0x36188000-0x367fd87f]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACER )
[ 0.000000] ACPI: XSDT 0x000000003F6FE120 000064 (v01 ACER ACER 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000003F6FC000 0000F4 (v04 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 0x000000003F6F1000 006D08 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 0x000000003F688000 000040
[ 0.000000] ACPI: FACS 0x000000003F688000 000040
[ 0.000000] ACPI: SSDT 0x000000003F6FD000 0004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: HPET 0x000000003F6FB000 000038 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 0x000000003F6FA000 000068 (v02 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 0x000000003F6F9000 00003C (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 0x000000003F6F8000 0000A5 (v32 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 0x000000003F6F0000 000180 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 0x000000003F6EF000 000028 (v01 ACER ACER 00000001 1025 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 143MB HIGHMEM available.
[ 0.000000] 871MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 367fe000
[ 0.000000] low ram: 0 - 367fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x1bb66000, 0x1bb66fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000367fdfff]
[ 0.000000] HighMem [mem 0x00000000367fe000-0x000000003f6fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003f575fff]
[ 0.000000] node 0: [mem 0x000000003f5bf000-0x000000003f66cfff]
[ 0.000000] node 0: [mem 0x000000003f6bf000-0x000000003f6eefff]
[ 0.000000] node 0: [mem 0x000000003f6ff000-0x000000003f6fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f6fffff]
[ 0.000000] On node 0 totalpages: 259571
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2140 pages used for memmap
[ 0.000000] Normal zone: 219134 pages, LIFO batch:31
[ 0.000000] HighMem zone: 36439 pages, LIFO batch:7
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s86988 r0 d31796 u118784
[ 0.000000] pcpu-alloc: s86988 r0 d31796 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257391
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8593562a-e6fb-4a2a-a85b-fde81f543227 rw quiet
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] BRK [0x1bb67000, 0x1bb67fff] PGTABLE
[ 0.000000] BRK [0x1bb68000, 0x1bb68fff] PGTABLE
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000367fe:0003f700)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1008736K/1038284K available (6517K kernel code, 649K rwdata, 2700K rodata, 792K init, 448K bss, 29548K reserved, 0K cma-reserved, 145756K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffab5000 - 0xfffff000 (5416 kB)
cpu_entry : 0xfec00000 - 0xff5c1000 (9988 kB)
pkmap : 0xfe800000 - 0xfec00000 (4096 kB)
vmalloc : 0xf6ffe000 - 0xfe7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf67fe000 ( 871 MB)
.init : 0xdb9b6000 - 0xdba7c000 ( 792 kB)
.data : 0xdb65d6e0 - 0xdb9a76c0 (3367 kB)
.text : 0xdb000000 - 0xdb65d6e0 (6517 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 29155 entries in 57 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005000] tsc: Fast TSC calibration using PIT
[ 0.006000] tsc: Detected 1596.183 MHz processor
[ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.36 BogoMIPS (lpj=1596183)
[ 0.006000] pid_max: default: 32768 minimum: 301
[ 0.006000] Security Framework initialized
[ 0.006000] Yama: becoming mindful.
[ 0.006000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.007072] Disabled fast string operations
[ 0.007080] CPU: Physical Processor ID: 0
[ 0.007083] CPU: Processor Core ID: 0
[ 0.007096] mce: CPU supports 5 MCE banks
[ 0.007109] CPU0: Thermal monitoring enabled (TM2)
[ 0.007115] process: using mwait in idle threads
[ 0.007128] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.007131] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.007330] Freeing SMP alternatives memory: 24K
[ 0.010000] smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (family: 0x6, model: 0x1c, stepping: 0x2)
[ 0.013034] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.013056] ... version: 3
[ 0.013059] ... bit width: 40
[ 0.013061] ... generic registers: 2
[ 0.013064] ... value mask: 000000ffffffffff
[ 0.013067] ... max period: 000000007fffffff
[ 0.013069] ... fixed-purpose events: 3
[ 0.013072] ... event mask: 0000000700000003
[ 0.015017] Hierarchical SRCU implementation.
[ 0.022211] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.024017] smp: Bringing up secondary CPUs ...
[ 0.033060] CPU 1 irqstacks, hard=2cbe79e8 soft=bdee4d76
[ 0.033065] x86: Booting SMP configuration:
[ 0.033069] .... node #0, CPUs: #1
[ 0.001000] Initializing CPU#1
[ 0.001000] Disabled fast string operations
[ 0.034137] smp: Brought up 1 node, 2 CPUs
[ 0.034137] smpboot: Max logical packages: 1
[ 0.034137] smpboot: Total of 2 processors activated (6384.73 BogoMIPS)
[ 0.035357] devtmpfs: initialized
[ 0.036093] PM: Registering ACPI NVS region [mem 0x3f66d000-0x3f6befff] (335872 bytes)
[ 0.036316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.036316] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.036316] pinctrl core: initialized pinctrl subsystem
[ 0.037250] RTC time: 17:49:52, date: 04/23/18
[ 0.037545] NET: Registered protocol family 16
[ 0.039028] cpuidle: using governor ladder
[ 0.040023] cpuidle: using governor menu
[ 0.040122] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.040125] Simple Boot Flag at 0x44 set to 0x1
[ 0.040253] ACPI: bus type PCI registered
[ 0.040259] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040454] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.040480] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.040480] PCI: Using MMCONFIG for extended config space
[ 0.040480] PCI: Using configuration type 1 for base access
[ 0.046067] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.047135] ACPI: Added _OSI(Module Device)
[ 0.047141] ACPI: Added _OSI(Processor Device)
[ 0.047145] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.047149] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.047632] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.055488] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.063098] ACPI: Dynamic OEM Table Load:
[ 0.063119] ACPI: SSDT 0x00000000F5186C00 000239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.064109] ACPI: Dynamic OEM Table Load:
[ 0.064126] ACPI: SSDT 0x00000000F51C4E00 0001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.065954] ACPI: Dynamic OEM Table Load:
[ 0.065971] ACPI: SSDT 0x00000000F51A1500 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.066759] ACPI: Dynamic OEM Table Load:
[ 0.066775] ACPI: SSDT 0x00000000F51AF840 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.068416] ACPI: EC: EC started
[ 0.068420] ACPI: EC: interrupt blocked
[ 0.068987] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC
[ 0.068995] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.069016] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions
[ 0.069018] ACPI: Interpreter enabled
[ 0.069096] ACPI: (supports S0 S3 S4 S5)
[ 0.069101] ACPI: Using IOAPIC for interrupt routing
[ 0.069214] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.070000] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.225620] ACPI: Power Resource [FN00] (on)
[ 0.229516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.229538] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.229880] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dsfield-212)
[ 0.229920] ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20170831/psparse-550)
[ 0.229971] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.232777] PCI host bridge to bus 0000:00
[ 0.232787] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.232793] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
[ 0.232798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.232804] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[ 0.232810] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.232840] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[ 0.233207] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[ 0.233229] pci 0000:00:02.0: reg 0x10: [mem 0x56280000-0x562fffff]
[ 0.233240] pci 0000:00:02.0: reg 0x14: [io 0x50f0-0x50f7]
[ 0.233251] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[ 0.233261] pci 0000:00:02.0: reg 0x1c: [mem 0x56300000-0x5633ffff]
[ 0.233601] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.233622] pci 0000:00:02.1: reg 0x10: [mem 0x56200000-0x5627ffff]
[ 0.234027] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.234072] pci 0000:00:1b.0: reg 0x10: [mem 0x56340000-0x56343fff 64bit]
[ 0.234219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.234568] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.234733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.235092] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.235243] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.235582] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.235749] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.236110] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.236186] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf]
[ 0.236537] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.236612] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f]
[ 0.236972] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.237062] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f]
[ 0.237413] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.237488] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f]
[ 0.237858] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.237895] pci 0000:00:1d.7: reg 0x10: [mem 0x56344400-0x563447ff]
[ 0.238038] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.238352] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.238750] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.238901] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.238912] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.238922] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[ 0.238929] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.239281] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.239312] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.239329] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.239345] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.239360] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.239377] pci 0000:00:1f.1: reg 0x20: [io 0x50c0-0x50cf]
[ 0.239408] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.239413] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.239417] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.239422] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.239748] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.239784] pci 0000:00:1f.2: reg 0x10: [io 0x50d8-0x50df]
[ 0.239801] pci 0000:00:1f.2: reg 0x14: [io 0x50fc-0x50ff]
[ 0.239817] pci 0000:00:1f.2: reg 0x18: [io 0x50d0-0x50d7]
[ 0.239833] pci 0000:00:1f.2: reg 0x1c: [io 0x50f8-0x50fb]
[ 0.239849] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x502f]
[ 0.239866] pci 0000:00:1f.2: reg 0x24: [mem 0x56344000-0x563443ff]
[ 0.239945] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.240281] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.240375] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 0.241025] acpiphp: Slot [1] registered
[ 0.241150] pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
[ 0.241212] pci 0000:01:00.0: reg 0x10: [mem 0x55100000-0x5510ffff 64bit]
[ 0.241433] pci 0000:01:00.0: supports D1 D2
[ 0.241439] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241676] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.241700] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.241712] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.241720] pci 0000:00:1c.0: bridge window [mem 0x55100000-0x561fffff]
[ 0.241732] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.241903] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.241913] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.241921] pci 0000:00:1c.1: bridge window [mem 0x54100000-0x550fffff]
[ 0.241933] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.242150] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000
[ 0.242210] pci 0000:03:00.0: reg 0x10: [mem 0x53000000-0x5303ffff 64bit]
[ 0.242232] pci 0000:03:00.0: reg 0x18: [io 0x1000-0x107f]
[ 0.242425] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.245055] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.245065] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.245074] pci 0000:00:1c.2: bridge window [mem 0x53000000-0x540fffff]
[ 0.245086] pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.245242] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.245262] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.245267] pci 0000:00:1e.0: bridge window [io 0x0d00-0xefff window] (subtractive decode)
[ 0.245273] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.245278] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff window] (subtractive decode)
[ 0.245319] pci_bus 0000:00: on NUMA node 0
[ 0.309583] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.309991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.310401] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.310803] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.311212] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.311604] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.312022] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.312414] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.314940] ACPI: EC: interrupt unblocked
[ 0.314960] ACPI: EC: event unblocked
[ 0.314977] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.314984] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.315277] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.315277] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.315277] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.315277] vgaarb: loaded
[ 0.316115] EDAC MC: Ver: 3.0.0
[ 0.317117] PCI: Using ACPI for IRQ routing
[ 0.329125] PCI: pci_cache_line_size set to 64 bytes
[ 0.329227] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.329232] e820: reserve RAM buffer [mem 0x3f576000-0x3fffffff]
[ 0.329236] e820: reserve RAM buffer [mem 0x3f66d000-0x3fffffff]
[ 0.329240] e820: reserve RAM buffer [mem 0x3f6ef000-0x3fffffff]
[ 0.329244] e820: reserve RAM buffer [mem 0x3f700000-0x3fffffff]
[ 0.329591] NetLabel: Initializing
[ 0.329595] NetLabel: domain hash size = 128
[ 0.329597] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.329649] NetLabel: unlabeled traffic allowed by default
[ 0.330141] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.330157] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.330169] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.332069] clocksource: Switched to clocksource hpet
[ 0.379271] VFS: Disk quotas dquot_6.6.0
[ 0.379326] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.379571] pnp: PnP ACPI init
[ 0.443826] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 0.444043] system 00:00: [io 0x0200-0x020f] has been reserved
[ 0.444053] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.444059] system 00:00: [io 0x0610] has been reserved
[ 0.444065] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.444071] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.444077] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.444084] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.444092] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.444099] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.444105] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.444111] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.444117] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.444124] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.444130] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.444155] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444354] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.444700] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.445105] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[ 0.445495] pnp: PnP ACPI: found 4 devices
[ 0.488402] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.488486] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.488495] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.488506] pci 0000:00:1c.0: bridge window [mem 0x55100000-0x561fffff]
[ 0.488515] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.488526] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.488533] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.488542] pci 0000:00:1c.1: bridge window [mem 0x54100000-0x550fffff]
[ 0.488551] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.488563] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.488569] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.488579] pci 0000:00:1c.2: bridge window [mem 0x53000000-0x540fffff]
[ 0.488587] pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.488600] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.488622] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.488628] pci_bus 0000:00: resource 5 [io 0x0d00-0xefff window]
[ 0.488633] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.488639] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]
[ 0.488644] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.488649] pci_bus 0000:01: resource 1 [mem 0x55100000-0x561fffff]
[ 0.488655] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.488660] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.488665] pci_bus 0000:02: resource 1 [mem 0x54100000-0x550fffff]
[ 0.488670] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.488676] pci_bus 0000:03: resource 0 [io 0x1000-0x2fff]
[ 0.488681] pci_bus 0000:03: resource 1 [mem 0x53000000-0x540fffff]
[ 0.488686] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.488692] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.488697] pci_bus 0000:04: resource 5 [io 0x0d00-0xefff window]
[ 0.488702] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.488708] pci_bus 0000:04: resource 7 [mem 0x40000000-0xfebfffff window]
[ 0.489101] NET: Registered protocol family 2
[ 0.489583] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.489637] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.489695] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.489777] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.489795] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.489936] NET: Registered protocol family 1
[ 0.489988] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.494733] pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.494742] PCI: CLS 0 bytes, default 64
[ 0.494904] Unpacking initramfs...
[ 0.836431] Freeing initrd memory: 6616K
[ 0.836753] apm: BIOS not found.
[ 0.836862] Scanning for low memory corruption every 60 seconds
[ 0.838524] Initialise system trusted keyrings
[ 0.838552] Key type blacklist registered
[ 0.838734] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.843456] zbud: loaded
[ 0.849680] Key type asymmetric registered
[ 0.849688] Asymmetric key parser 'x509' registered
[ 0.849729] bounce: pool size: 64 pages
[ 0.849788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.849934] io scheduler noop registered
[ 0.849940] io scheduler deadline registered
[ 0.850242] io scheduler cfq registered (default)
[ 0.850248] io scheduler mq-deadline registered
[ 0.850251] io scheduler kyber registered
[ 0.850344] io scheduler bfq registered
[ 0.852116] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.853933] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 0.853938] vesafb: scrolling: redraw
[ 0.853943] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.853978] vesafb: framebuffer at 0x40000000, mapped to 0x37a10421, using 1920k, total 1920k
[ 0.881477] Console: switching to colour frame buffer device 100x37
[ 0.908183] fb0: VESA VGA frame buffer device
[ 0.908278] intel_idle: MWAIT substates: 0x20220
[ 0.908283] intel_idle: v0.4.1 model 0x1C
[ 0.908296] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.908537] intel_idle: lapic_timer_reliable_states 0x2
[ 0.908687] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.908720] ACPI: Power Button [PWRB]
[ 0.908875] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.908900] ACPI: Lid Switch [LID0]
[ 0.909072] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.909102] ACPI: Sleep Button [SLPB]
[ 0.909280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.909370] ACPI: Power Button [PWRF]
[ 0.910227] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 0.910888] acpi device:18: registered as cooling_device1
[ 0.911138] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.912672] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.912851] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.912855] ACPI: Thermal Zone [THRM] (27 C)
[ 0.913258] isapnp: Scanning for PnP cards...
[ 1.226493] isapnp: No Plug & Play device found
[ 1.226861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.230552] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.231411] NET: Registered protocol family 10
[ 1.245218] Segment Routing with IPv6
[ 1.245292] NET: Registered protocol family 17
[ 1.245873] RAS: Correctable Errors collector initialized.
[ 1.245990] microcode: sig=0x106c2, pf=0x4, revision=0x212
[ 1.246219] microcode: Microcode Update Driver: v2.2.
[ 1.246230] Using IPI No-Shortcut mode
[ 1.246765] registered taskstats version 1
[ 1.246790] Loading compiled-in X.509 certificates
[ 1.246847] zswap: loaded using pool lzo/zbud
[ 1.259732] Key type big_key registered
[ 1.260450] Magic number: 14:307:846
[ 1.260567] hctosys: unable to open rtc device (rtc0)
[ 1.264697] Freeing unused kernel memory: 792K
[ 1.264947] Write protecting the kernel text: 6520k
[ 1.265270] Write protecting the kernel read-only data: 2716k
[ 1.675779] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.707136] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.707361] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.741856] ACPI: bus type USB registered
[ 1.741993] usbcore: registered new interface driver usbfs
[ 1.742146] usbcore: registered new interface driver hub
[ 1.742281] usbcore: registered new device driver usb
[ 1.746587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.747717] ehci-pci: EHCI PCI platform driver
[ 1.748667] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.748710] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.748748] ehci-pci 0000:00:1d.7: debug port 1
[ 1.757117] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.757189] ehci-pci 0000:00:1d.7: irq 16, io mem 0x56344400
[ 1.759143] SCSI subsystem initialized
[ 1.764139] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.764435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.764446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764454] usb usb1: Product: EHCI Host Controller
[ 1.764461] usb usb1: Manufacturer: Linux 4.15.15-1.0-ARCH ehci_hcd
[ 1.764468] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.765175] hub 1-0:1.0: USB hub found
[ 1.765231] hub 1-0:1.0: 8 ports detected
[ 1.772797] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.773301] libata version 3.00 loaded.
[ 1.773852] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.773888] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.773922] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.773967] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[ 1.775326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.775337] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.775344] usb usb2: Product: UHCI Host Controller
[ 1.775351] usb usb2: Manufacturer: Linux 4.15.15-1.0-ARCH uhci_hcd
[ 1.775357] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.775991] hub 2-0:1.0: USB hub found
[ 1.776095] hub 2-0:1.0: 2 ports detected
[ 1.778636] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.778671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.778696] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.778780] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[ 1.779172] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.779182] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.779188] usb usb3: Product: UHCI Host Controller
[ 1.779193] usb usb3: Manufacturer: Linux 4.15.15-1.0-ARCH uhci_hcd
[ 1.779199] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.779792] hub 3-0:1.0: USB hub found
[ 1.779832] hub 3-0:1.0: 2 ports detected
[ 1.781286] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.781311] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.781332] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.781405] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[ 1.781764] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.781774] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.781781] usb usb4: Product: UHCI Host Controller
[ 1.781788] usb usb4: Manufacturer: Linux 4.15.15-1.0-ARCH uhci_hcd
[ 1.781795] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.782505] hub 4-0:1.0: USB hub found
[ 1.782562] hub 4-0:1.0: 2 ports detected
[ 1.784238] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.784267] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.784292] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.784386] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[ 1.784731] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.784742] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.784749] usb usb5: Product: UHCI Host Controller
[ 1.784756] usb usb5: Manufacturer: Linux 4.15.15-1.0-ARCH uhci_hcd
[ 1.784763] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.785432] hub 5-0:1.0: USB hub found
[ 1.785484] hub 5-0:1.0: 2 ports detected
[ 1.787298] ata_piix 0000:00:1f.1: version 2.13
[ 1.792135] scsi host0: ata_piix
[ 1.796809] scsi host1: ata_piix
[ 1.797177] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[ 1.797186] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[ 1.797643] ahci 0000:00:1f.2: version 3.0
[ 1.798431] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.798485] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.798493] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 1.799276] ata2: port disabled--ignoring
[ 1.802956] scsi host2: ahci
[ 1.804909] scsi host3: ahci
[ 1.807515] scsi host4: ahci
[ 1.809656] scsi host5: ahci
[ 1.809885] ata3: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344100 irq 24
[ 1.809890] ata4: DUMMY
[ 1.809896] ata5: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344200 irq 24
[ 1.809899] ata6: DUMMY
[ 1.888079] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17020f3810f, max_idle_ns: 440795274292 ns
[ 1.911510] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.090176] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 2.119421] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.121115] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.121603] ata3.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[ 2.121615] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.123655] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.124142] ata3.00: configured for UDMA/133
[ 2.124646] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54321 C40C PQ: 0 ANSI: 5
[ 2.255942] usb 1-2: New USB device found, idVendor=0c45, idProduct=62c0
[ 2.255957] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.255966] usb 1-2: Product: WebCam
[ 2.255986] usb 1-2: Manufacturer: Sonix Technology Co., Ltd.
[ 2.431897] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.451128] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.451216] sd 2:0:0:0: [sda] Write Protect is off
[ 2.451225] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.451376] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.477556] sda: sda1 sda2
[ 2.479406] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.293597] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.557070] random: crng init done
[ 5.037145] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.169378] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 5.181531] systemd[1]: Detected architecture x86.
[ 5.192265] systemd[1]: Set hostname to <Arch>.
[ 7.045353] systemd[1]: Listening on udev Control Socket.
[ 7.048261] systemd[1]: Created slice User and Session Slice.
[ 7.048759] systemd[1]: Listening on Journal Socket.
[ 7.049197] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.078459] systemd[1]: Starting Load Kernel Modules...
[ 7.078992] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.079500] systemd[1]: Listening on udev Kernel Socket.
[ 7.639919] vboxguest: loading out-of-tree module taints kernel.
[ 7.650108] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.693543] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.747433] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 8.184617] systemd-journald[203]: Received request to flush runtime journal from PID 1
[ 8.465075] Adding 1018876k swap on /swapfile. Priority:-2 extents:5 across:1051644k FS
[ 8.467870] Linux agpgart interface v0.103
[ 11.013114] rtc_cmos 00:01: RTC can wake from S4
[ 11.015185] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 11.015269] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 11.067647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.148376] ACPI: AC Adapter [AC] (off-line)
[ 11.600172] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[ 11.647797] intel_rng: FWH not detected
[ 11.649306] pci 0000:00:00.0: Intel 945GME Chipset
[ 11.649356] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 11.649454] pci 0000:00:00.0: detected 8192K stolen memory
[ 11.649559] [drm] Memory usable by graphics device = 256M
[ 11.649571] checking generic (40000000 1e0000) vs hw (40000000 10000000)
[ 11.649576] fb: switching to inteldrmfb from VESA VGA
[ 11.649653] Console: switching to colour dummy device 80x25
[ 11.655888] [drm] Replacing VGA console driver
[ 11.655960] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.655965] [drm] Driver supports precise vblank timestamp query.
[ 11.677261] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.730268] [drm] RC6 disabled, disabling runtime PM support
[ 11.730358] [drm] initialized overlay support
[ 11.732097] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 11.740485] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20170831/utaddress-247)
[ 11.740510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.740518] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
[ 11.740535] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.740540] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
[ 11.740557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.740560] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.755179] fbcon: inteldrmfb (fb0) is primary device
[ 11.775409] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.813785] media: Linux media interface: v0.10
[ 11.828671] ACPI: Battery Slot [BAT0] (battery present)
[ 11.835722] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.853240] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.853249] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.853256] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 11.853261] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.853266] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.853274] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.853280] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.865560] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 11.865570] cfg80211: failed to load regulatory.db
[ 11.895458] leds_ss4200: no LED devices found
[ 11.901421] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.902469] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.902814] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.951299] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 12.040127] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 12.044976] Linux video capture interface: v2.00
[ 12.265150] intel_powerclamp: No package C-state available
[ 12.423335] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[ 12.440201] uvcvideo 1-2:1.0: Entity type for entity Extension 5 was not initialized!
[ 12.440211] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[ 12.440219] uvcvideo 1-2:1.0: Entity type for entity Processing 3 was not initialized!
[ 12.440227] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 12.440601] input: WebCam: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input12
[ 12.441300] usbcore: registered new interface driver uvcvideo
[ 12.441303] USB Video Class driver (1.1.1)
[ 12.448564] ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.449129] ath5k 0000:01:00.0: registered as 'phy0'
[ 12.520235] Console: switching to colour frame buffer device 128x37
[ 12.551438] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.059580] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 13.189327] acer_wmi: Function bitmap for Communication Device: 0x1
[ 13.211324] atl1c 0000:03:00.0 enp3s0: renamed from eth0
[ 13.283102] ath: EEPROM regdomain: 0x65
[ 13.283105] ath: EEPROM indicates we should expect a direct regpair map
[ 13.283111] ath: Country alpha2 being used: 00
[ 13.283113] ath: Regpair used: 0x65
[ 13.343674] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.345329] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 13.393125] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[ 13.463684] iTCO_vendor_support: vendor-support=0
[ 13.531752] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.531919] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 13.532427] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.538764] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0000/0x0, board id: 0, fw id: 516037
[ 13.635896] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 14.053491] vboxguest: PCI device not found, probably running on physical hardware.
[ 14.086379] ath5k 0000:01:00.0 wls1: renamed from wlan0
[ 14.096571] vboxguest: PCI device not found, probably running on physical hardware.
[ 14.190206] mousedev: PS/2 mouse device common for all mice
[ 18.450752] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 18.465671] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 18.493381] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 18.504836] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 18.520521] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 20.105573] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 30.313255] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 31.394879] wls1: authenticate with 1c:74:0d:1c:7f:9c
[ 31.409650] wls1: send auth to 1c:74:0d:1c:7f:9c (try 1/3)
[ 31.428197] wls1: authenticated
[ 31.429095] wls1: associate with 1c:74:0d:1c:7f:9c (try 1/3)
[ 31.431619] wls1: RX AssocResp from 1c:74:0d:1c:7f:9c (capab=0x431 status=0 aid=4)
[ 31.431779] wls1: associated
[ 32.693787] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 37.801961] fuse init (API version 7.26)
[ 55.636076] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 55.812177] usb 3-2: New USB device found, idVendor=1c4f, idProduct=0034
[ 55.812191] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 55.812199] usb 3-2: Product: Usb Mouse
[ 55.812206] usb 3-2: Manufacturer: SIGMACHIP
[ 55.903573] hidraw: raw HID events driver (C) Jiri Kosina
[ 55.967991] usbcore: registered new interface driver usbhid
[ 55.967999] usbhid: USB HID core driver
[ 56.006614] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1C4F:0034.0001/input/input13
[ 56.009454] hid-generic 0003:1C4F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-2/input0
[ 84.583795] perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 111.278657] perf: interrupt took too long (3166 > 3153), lowering kernel.perf_event_max_sample_rate to 63000
[ 378.003127] perf: interrupt took too long (3997 > 3957), lowering kernel.perf_event_max_sample_rate to 50000
[ 533.604155] perf: interrupt took too long (5003 > 4996), lowering kernel.perf_event_max_sample_rate to 39000
[ 660.473095] perf: interrupt took too long (6272 > 6253), lowering kernel.perf_event_max_sample_rate to 31000
[ 784.504385] usb 3-2: USB disconnect, device number 2
[ 957.826180] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 958.682272] usb 3-2: New USB device found, idVendor=1c4f, idProduct=0034
[ 958.682289] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 958.682299] usb 3-2: Product: Usb Mouse
[ 958.682308] usb 3-2: Manufacturer: SIGMACHIP
[ 958.707588] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1C4F:0034.0002/input/input14
[ 958.708785] hid-generic 0003:1C4F:0034.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-2/input0
[ 1177.008206] usb 3-2: USB disconnect, device number 3 Offline
judd: no, you misunderstood, I think. I need the output of "pacman -Syu" (or whatever command you use to update where you receive an error)
Offline
$ sudo pacman -Syy archlinux32-keyring
:: Sincronizando las bases de datos de los paquetes...
core 175,1 KiB 303K/s 00:01 [----------------------] 100%
extra 2,3 MiB 924K/s 00:03 [----------------------] 100%
community 4,9 MiB 910K/s 00:06 [----------------------] 100%
archlinuxfr 7,5 KiB 2,44M/s 00:00 [----------------------] 100%
advertencia: archlinux32-keyring-20180411-1.0 está actualizado -- reinstalándolo
resolviendo dependencias...
buscando conflictos entre paquetes...
Paquetes (1) archlinux32-keyring-20180411-1.0
Tamaño total de la descarga: 0,03 MiB
Tamaño total de la instalación: 0,06 MiB
Tamaño neto tras actualizar: 0,00 MiB
:: ¿Continuar con la instalación? [S/n]
:: Obteniendo los paquetes...
archlinux32-keyring... 31,6 KiB 169K/s 00:00 [----------------------] 100%
(1/1) comprobando las claves del depósito [----------------------] 100%
(1/1) verificando la integridad de los paquetes [----------------------] 100%
error: archlinux32-keyring: signature from "Tyler Dence (Build Key) <tyzoid@archlinux32.org>" is unknown trust
:: El archivo /var/cache/pacman/pkg/archlinux32-keyring-20180411-1.0-any.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: no se pudo realizar la operación (paquete no válido o dañado (firma PGP))
Ocurrieron errores, por lo que no se actualizaron los paquetesOffline
$ sudo pacman -Syu
:: Sincronizando las bases de datos de los paquetes...
core está actualizado
extra está actualizado
community está actualizado
archlinuxfr está actualizado
:: Iniciando actualización completa del sistema...
...el sistema ya está actualizado.Offline
This is strange. Does a "pacman-key --populate archlinux32" before the "pacman -Sy archlinux32-keyring" help?
Offline
If everything else fails, this might help.
Offline
# pacman-key --populate archlinux32
==> Añadiendo las claves de archlinux32.gpg...
==> Firmando localmente las claves de confianza en el depósito...
-> Firmando localmente la clave CE0BDE71A759A87F23F0F7D8B61DBCE10901C163...
-> Firmando localmente la clave 2FF1E976D6EB2E954A87DC14443904EC9EC51A8A...
-> Firmando localmente la clave D92CDDC155BCC8F550B5FCEC30AB721FE7400FCD...
-> Firmando localmente la clave A0B250C0FC9FC079EC04ADB7A50C0F20AEC3AF00...
-> Firmando localmente la clave 194E37A47A4C671807BACB37B1117BC1094EA6E9...
==> Importando los valores de los propietarios de confianza...
gpg: inserting ownertrust of 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
==> Desactivando las claves revocadas en el depósito...
-> Desactivando la clave C3A8190912128B5A2E96C6023ED6490AEF932C8A...
-> Desactivando la clave 7C98C4C3DE926168DC46FBAA3D06644243BF68D3...
==> Actualizando la base de datos de claves de confianza...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: nivel: 0 validez: 1 firmada: 10 confianza: 0-, 0q, 0n, 0m, 0f, 1u
gpg: nivel: 1 validez: 10 firmada: 74 confianza: 0-, 0q, 0n, 10m, 0f, 0u
gpg: nivel: 2 validez: 74 firmada: 8 confianza: 74-, 0q, 0n, 0m, 0f, 0u
gpg: siguiente comprobación de base de datos de confianza el: 2018-05-15 # # pacman -Sy archlinux32-keyring
:: Sincronizando las bases de datos de los paquetes...
core está actualizado
extra está actualizado
community está actualizado
archlinuxfr está actualizado
advertencia: archlinux32-keyring-20180411-1.0 está actualizado -- reinstalándolo
resolviendo dependencias...
buscando conflictos entre paquetes...
Paquetes (1) archlinux32-keyring-20180411-1.0
Tamaño total de la descarga: 0,03 MiB
Tamaño total de la instalación: 0,06 MiB
Tamaño neto tras actualizar: 0,00 MiB
:: ¿Continuar con la instalación? [S/n]
:: Obteniendo los paquetes...
archlinux32-keyring... 31,6 KiB 162K/s 00:00 [----------------------] 100%
(1/1) comprobando las claves del depósito [----------------------] 100%
(1/1) verificando la integridad de los paquetes [----------------------] 100%
(1/1) cargando los archivos de los paquetes [----------------------] 100%
(1/1) comprobando conflictos entre archivos [----------------------] 100%
(1/1) comprobando el espacio disponible en el ... [----------------------] 100%
:: Procesando los cambios de los paquetes...
(1/1) reinstalando archlinux32-keyring [----------------------] 100%
==> Añadiendo las claves de archlinux32.gpg...
==> Firmando localmente las claves de confianza en el depósito...
-> Firmando localmente la clave CE0BDE71A759A87F23F0F7D8B61DBCE10901C163...
-> Firmando localmente la clave 2FF1E976D6EB2E954A87DC14443904EC9EC51A8A...
-> Firmando localmente la clave D92CDDC155BCC8F550B5FCEC30AB721FE7400FCD...
-> Firmando localmente la clave A0B250C0FC9FC079EC04ADB7A50C0F20AEC3AF00...
-> Firmando localmente la clave 194E37A47A4C671807BACB37B1117BC1094EA6E9...
==> Importando los valores de los propietarios de confianza...
==> Desactivando las claves revocadas en el depósito...
-> Desactivando la clave C3A8190912128B5A2E96C6023ED6490AEF932C8A...
-> Desactivando la clave 7C98C4C3DE926168DC46FBAA3D06644243BF68D3...
==> Actualizando la base de datos de claves de confianza...
gpg: siguiente comprobación de base de datos de confianza el: 2018-05-15
:: Ejecutando los «hooks» de posinstalación...
(1/1) Arming ConditionNeedsUpdate... $ pacman -S yaourt
error: no puede realizar esta operación, a menos que sea superusuario.
[judd@Arch ~]$ sudo pacman -S yaourt
[sudo] password for judd:
resolviendo dependencias...
advertencia: no se pudo resolver «package-query>=1.8», una dependencia de «yaourt»
:: El siguiente paquete no se puede actualizar debido a dependencias que no se pudieron resolver:
yaourt
:: ¿Quiere omitir el siguiente paquete para esta actualización? [s/N]
error: no se pudo preparar la operación (no se pudieron satisfacer las dependencias)
:: yaourt: necesita package-query>=1.8
[judd@Arch ~]$ Offline
It does not work
[root@Arch judd]# rm -r /etc/pacman.d/gnupg/
rm: no se puede borrar '/etc/pacman.d/gnupg/': Dispositivo o recurso ocupado
[root@Arch judd]# rm -r /etc/pacman.d/gnupg/
rm: no se puede borrar '/etc/pacman.d/gnupg/': Dispositivo o recurso ocupado
[root@Arch judd]# pacman-key --init
gpg: /etc/pacman.d/gnupg/trustdb.gpg: se ha creado base de datos de confianza
gpg: no se encuentran claves absolutamente fiables
gpg: starting migration from earlier GnuPG versions
gpg: porting secret keys from '/etc/pacman.d/gnupg/secring.gpg' to gpg-agent
gpg: migration succeeded
gpg: Generating pacman keyring master key...
gpg: clave 8C536A0294F87FE1 marcada como de confianza absoluta
gpg: directory '/etc/pacman.d/gnupg/openpgp-revocs.d' created
gpg: revocation certificate stored as '/etc/pacman.d/gnupg/openpgp-revocs.d/DAC6C5524A25528E8F8D93128C536A0294F87FE1.rev'
gpg: Done
==> Actualizando la base de datos de claves de confianza...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: nivel: 0 validez: 1 firmada: 0 confianza: 0-, 0q, 0n, 0m, 0f, 1u
[root@Arch judd]# pacman-key --populate archlinux32
==> Añadiendo las claves de archlinux32.gpg...
==> Firmando localmente las claves de confianza en el depósito...
-> Firmando localmente la clave CE0BDE71A759A87F23F0F7D8B61DBCE10901C163...
-> Firmando localmente la clave 2FF1E976D6EB2E954A87DC14443904EC9EC51A8A...
-> Firmando localmente la clave D92CDDC155BCC8F550B5FCEC30AB721FE7400FCD...
-> Firmando localmente la clave A0B250C0FC9FC079EC04ADB7A50C0F20AEC3AF00...
-> Firmando localmente la clave 194E37A47A4C671807BACB37B1117BC1094EA6E9...
==> Importando los valores de los propietarios de confianza...
gpg: inserting ownertrust of 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
==> Desactivando las claves revocadas en el depósito...
-> Desactivando la clave C3A8190912128B5A2E96C6023ED6490AEF932C8A...
-> Desactivando la clave 7C98C4C3DE926168DC46FBAA3D06644243BF68D3...
==> Actualizando la base de datos de claves de confianza...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: nivel: 0 validez: 1 firmada: 5 confianza: 0-, 0q, 0n, 0m, 0f, 1u
gpg: nivel: 1 validez: 5 firmada: 3 confianza: 0-, 0q, 0n, 5m, 0f, 0u
gpg: nivel: 2 validez: 3 firmada: 0 confianza: 3-, 0q, 0n, 0m, 0f, 0u
gpg: siguiente comprobación de base de datos de confianza el: 2018-05-15
[root@Arch judd]# pacman -Sc
Paquetes a mantener:
Todos los paquetes instalados localmente
Directorio de la caché: /var/cache/pacman/pkg/
:: ¿Desea quitar los paquetes restantes de la caché? [S/n]
quitando paquetes antiguos de la caché...
Directorio de la base de datos: /var/lib/pacman/
:: ¿Desea quitar los repositorios no utilizados? [S/n]
quitando repositorios de sincronización no utilizados...
[root@Arch judd]# pacman -Syuu
:: Sincronizando las bases de datos de los paquetes...
core está actualizado
extra está actualizado
community está actualizado
archlinuxfr está actualizado
:: Iniciando actualización completa del sistema...
...el sistema ya está actualizado.
[root@Arch judd]# rm /var/cache/pacman/pkg/badpackage*
rm: no se puede borrar '/var/cache/pacman/pkg/badpackage*': No existe el fichero o el directorio
[root@Arch judd]# exit
exit
[judd@Arch ~]$ sudo pacman -S yaourt
[sudo] password for judd:
resolviendo dependencias...
advertencia: no se pudo resolver «package-query>=1.8», una dependencia de «yaourt»
:: El siguiente paquete no se puede actualizar debido a dependencias que no se pudieron resolver:
yaourt
:: ¿Quiere omitir el siguiente paquete para esta actualización? [s/N]
error: no se pudo preparar la operación (no se pudieron satisfacer las dependencias)
:: yaourt: necesita package-query>=1.8
[judd@Arch ~]$ Offline
your pacman keys look fine now. Your yaourt problem persists, because you didn't try what I told you: the steps abaumann posted.
Offline
Error
$ wget https://aur.archlinux.org/cgit/aur.git/snapshot/package-query.tar.gz
--2018-04-23 16:13:31-- https://aur.archlinux.org/cgit/aur.git/snapshot/package-query.tar.gz
Cargado certificado CA '/etc/ssl/certs/ca-certificates.crt'
Resolviendo aur.archlinux.org (aur.archlinux.org)... 5.9.250.164, 2a01:4f8:160:3033::2
Conectando con aur.archlinux.org (aur.archlinux.org)[5.9.250.164]:443... conectado.
Petición HTTP enviada, esperando respuesta... 200 OK
Longitud: no especificado [application/x-gzip]
Grabando a: “package-query.tar.gz”
package-query.tar.g [ <=> ] 850 --.-KB/s en 0s
2018-04-23 16:13:33 (3,16 MB/s) - “package-query.tar.gz” guardado [850]
[judd@Arch ~]$ tar xf package-query.tar.gz
[judd@Arch ~]$ cd package-query
[judd@Arch package-query]$ makepkg -si
==> Creando el paquete: package-query 1.9-2 (lun abr 23 16:16:03 -03 2018)
==> Comprobando dependencias mientras se ejecuta...
==> Instalando las dependencias que faltan...
[sudo] password for judd:
resolviendo dependencias...
buscando conflictos entre paquetes...
Paquetes (1) yajl-2.1.0-1
Tamaño total de la descarga: 0,03 MiB
Tamaño total de la instalación: 0,15 MiB
:: ¿Continuar con la instalación? [S/n]
:: Obteniendo los paquetes...
yajl-2.1.0-1-i686 32,0 KiB 155K/s 00:00 [----------------------] 100%
(1/1) comprobando las claves del depósito [----------------------] 100%
(1/1) verificando la integridad de los paquetes [----------------------] 100%
(1/1) cargando los archivos de los paquetes [----------------------] 100%
(1/1) comprobando conflictos entre archivos [----------------------] 100%
(1/1) comprobando el espacio disponible en el ... [----------------------] 100%
:: Procesando los cambios de los paquetes...
(1/1) instalando yajl [----------------------] 100%
:: Ejecutando los «hooks» de posinstalación...
(1/1) Arming ConditionNeedsUpdate...
==> Comprobando dependencias mientras se compila...
==> Recibiendo las fuentes...
-> Descargando package-query-1.9.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 357k 100 357k 0 0 119k 0 0:00:02 0:00:02 --:--:-- 119k
==> Validando los archivos source con sha256sums...
package-query-1.9.tar.gz ... Aprobado
==> Extrayendo las fuentes...
-> Extrayendo package-query-1.9.tar.gz con bsdtar
==> Iniciando build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking glob.h usability... yes
checking glob.h presence... yes
checking for glob.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking regex.h usability... yes
checking regex.h presence... yes
checking for regex.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking for sys/stat.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for alpm_version in -lalpm... yes
checking for pkg-config... no
checking for libalpm >= 10.0.0... no
configure: error: in `/home/judd/package-query/src/package-query-1.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables alpm_CFLAGS
and alpm_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
==> ERROR: Se produjo un fallo en build().
Cancelando...
[judd@Arch package-query]$ Offline
ah, right, you need to install base-devel in order to compile packages from aur: https://wiki.archlinux.org/index.php/Ar … ng_started
Offline
The tarball has an error from here:
checking for pkg-config... no
checking for libalpm >= 10.0.0... no
configure: error: in `/home/judd/package-query/src/package-query-1.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables alpm_CFLAGS
and alpm_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
==> ERROR: Se produjo un fallo en build().
Cancelando... Offline
yes, as I said: install base-devel, then try makepkg again
Offline
pacman -S base-devel-------->error ...
$ sudo pacman -S base-devel
:: Hay 26 miembros en el grupo base-devel:
:: Repositorio core
1) autoconf 2) automake 3) binutils 4) bison 5) fakeroot 6) file
7) findutils 8) flex 9) gawk 10) gcc 11) gettext 12) grep 13) groff
14) gzip 15) libtool 16) m4 17) make 18) pacman 19) patch
20) pkg-config 21) sed 22) sudo 23) systemd 24) texinfo 25) util-linux
26) which
Introduzca una selección (por omisión=todos):
advertencia: binutils-2.29.1-3.0 está actualizado -- reinstalándolo
advertencia: file-5.32-1 está actualizado -- reinstalándolo
advertencia: findutils-4.6.0-2 está actualizado -- reinstalándolo
advertencia: gawk-4.2.1-1.0 está actualizado -- reinstalándolo
advertencia: gcc-7.3.1+20180312-2.0 está actualizado -- reinstalándolo
advertencia: gettext-0.19.8.1-2 está actualizado -- reinstalándolo
advertencia: grep-3.1-1 está actualizado -- reinstalándolo
advertencia: groff-1.22.3-7 está actualizado -- reinstalándolo
advertencia: gzip-1.9-1.0 está actualizado -- reinstalándolo
advertencia: libtool-2.4.6+40+g6ca5e224-5.0 está actualizado -- reinstalándolo
advertencia: make-4.2.1-2.1 está actualizado -- reinstalándolo
advertencia: pacman-5.0.2-2 está actualizado -- reinstalándolo
advertencia: patch-2.7.6-1.0 está actualizado -- reinstalándolo
advertencia: sed-4.5-1.0 está actualizado -- reinstalándolo
advertencia: sudo-1.8.22-1.0 está actualizado -- reinstalándolo
advertencia: systemd-238.76-1.0 está actualizado -- reinstalándolo
advertencia: texinfo-6.5-1 está actualizado -- reinstalándolo
advertencia: util-linux-2.32-3.0 está actualizado -- reinstalándolo
advertencia: which-2.21-2 está actualizado -- reinstalándolo
resolviendo dependencias...
buscando conflictos entre paquetes...
Paquetes (26) autoconf-2.69-4.1 automake-1.15.1-1 binutils-2.29.1-3.0
bison-3.0.4-3 fakeroot-1.22-1 file-5.32-1 findutils-4.6.0-2
flex-2.6.4-1 gawk-4.2.1-1.0 gcc-7.3.1+20180312-2.0
gettext-0.19.8.1-2 grep-3.1-1 groff-1.22.3-7 gzip-1.9-1.0
libtool-2.4.6+40+g6ca5e224-5.0 m4-1.4.18-1.1 make-4.2.1-2.1
pacman-5.0.2-2 patch-2.7.6-1.0 pkg-config-0.29.2-1.2
sed-4.5-1.0 sudo-1.8.22-1.0 systemd-238.76-1.0 texinfo-6.5-1
util-linux-2.32-3.0 which-2.21-2
Tamaño total de la descarga: 53,22 MiB
Tamaño total de la instalación: 234,05 MiB
Tamaño neto tras actualizar: 7,59 MiB
:: ¿Continuar con la instalación? [S/n]
:: Obteniendo los paquetes...
gawk-4.2.1-1.0-i686 1053,6 KiB 309K/s 00:03 [----------------------] 100%
m4-1.4.18-1.1-i686 171,9 KiB 288K/s 00:01 [----------------------] 100%
autoconf-2.69-4.1-any 584,6 KiB 272K/s 00:02 [----------------------] 100%
automake-1.15.1-1-any 598,4 KiB 268K/s 00:02 [----------------------] 100%
binutils-2.29.1-3.0... 5,3 MiB 324K/s 00:17 [----------------------] 100%
bison-3.0.4-3-i686 568,5 KiB 328K/s 00:02 [----------------------] 100%
sed-4.5-1.0-i686 184,9 KiB 227K/s 00:01 [----------------------] 100%
util-linux-2.32-3.0... 2010,7 KiB 307K/s 00:07 [----------------------] 100%
fakeroot-1.22-1-i686 69,1 KiB 42,5K/s 00:02 [----------------------] 100%
file-5.32-1-i686 266,0 KiB 260K/s 00:01 [----------------------] 100%
findutils-4.6.0-2-i686 433,1 KiB 252K/s 00:02 [----------------------] 100%
flex-2.6.4-1-i686 288,2 KiB 193K/s 00:01 [----------------------] 100%
gcc-7.3.1+20180312-... 30,1 MiB 589K/s 00:52 [----------------------] 100%
gettext-0.19.8.1-2-i686 2,0 MiB 848K/s 00:02 [----------------------] 100%
grep-3.1-1-i686 197,5 KiB 98,3K/s 00:02 [----------------------] 100%
groff-1.22.3-7-i686 1924,3 KiB 563K/s 00:03 [----------------------] 100%
gzip-1.9-1.0-i686 79,1 KiB 49,2K/s 00:02 [----------------------] 100%
libtool-2.4.6+40+g6... 403,0 KiB 307K/s 00:01 [----------------------] 100%
texinfo-6.5-1-i686 1199,9 KiB 303K/s 00:04 [----------------------] 100%
make-4.2.1-2.1-i686 418,2 KiB 270K/s 00:02 [----------------------] 100%
pacman-5.0.2-2-i686 757,7 KiB 252K/s 00:03 [----------------------] 100%
patch-2.7.6-1.0-i686 105,0 KiB 254K/s 00:00 [----------------------] 100%
pkg-config-0.29.2-1... 36,7 KiB 197K/s 00:00 [----------------------] 100%
sudo-1.8.22-1.0-i686 668,3 KiB 257K/s 00:03 [----------------------] 100%
systemd-238.76-1.0-i686 4,1 MiB 389K/s 00:11 [----------------------] 100%
which-2.21-2-i686 16,1 KiB 2017K/s 00:00 [----------------------] 100%
(26/26) comprobando las claves del depósito [----------------------] 100%
descargando las claves necesarias...
:: ¿Importar clave PGP 4096 R / 5FDCA472AB93292BC678FD59255A76DB9A12601A, «Erich Eckner (just to sign arch packages) <arch@eckner.net>», creada: 2018-04-09? [S/n]
:: ¿Importar clave PGP 2048 R / 16194A82231E9EF823562181C8E8F5A0AF9BA7E7, «Andreas Baumann (sign) <mail@andreasbaumann.cc>», creada: 2017-11-02? [S/n]
(26/26) verificando la integridad de los paquetes [----------------------] 100%
error: gawk: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/gawk-4.2.1-1.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: m4: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/m4-1.4.18-1.1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: autoconf: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/autoconf-2.69-4.1-any.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: automake: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/automake-1.15.1-1-any.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: binutils: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/binutils-2.29.1-3.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: bison: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/bison-3.0.4-3-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: sed: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/sed-4.5-1.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: util-linux: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/util-linux-2.32-3.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: fakeroot: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/fakeroot-1.22-1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: file: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/file-5.32-1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: findutils: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/findutils-4.6.0-2-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: flex: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/flex-2.6.4-1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: gcc: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/gcc-7.3.1+20180312-2.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: gettext: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/gettext-0.19.8.1-2-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: grep: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/grep-3.1-1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: groff: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/groff-1.22.3-7-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: gzip: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/gzip-1.9-1.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: libtool: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/libtool-2.4.6+40+g6ca5e224-5.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: texinfo: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/texinfo-6.5-1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: make: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/make-4.2.1-2.1-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: pacman: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/pacman-5.0.2-2-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: patch: signature from "Andreas Baumann (sign) <mail@andreasbaumann.cc>" is unknown trust
:: El archivo /var/cache/pacman/pkg/patch-2.7.6-1.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: pkg-config: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/pkg-config-0.29.2-1.2-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: sudo: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/sudo-1.8.22-1.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: systemd: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/systemd-238.76-1.0-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: which: signature from "Erich Eckner (just to sign arch packages) <arch@eckner.net>" is unknown trust
:: El archivo /var/cache/pacman/pkg/which-2.21-2-i686.pkg.tar.xz está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n]
error: no se pudo realizar la operación (paquete no válido o dañado (firma PGP))
Ocurrieron errores, por lo que no se actualizaron los paquetes
[judd@Arch ~]$ Offline
Nor can I install anything with pacman, in any way ...
sudo pacman -S scrot #For installing any package
[sudo] password for judd:
resolving dependencies ...
looking for conflicts between packages ...
Packages (2) giblib-1.2.4-6 scrot-0.8.17-2
Total size of the download: 0.04 MiB
Total size of the installation: 0.19 MiB
:: Continue with the installation? [Y / n]
:: Getting packages ...
giblib-1.2.4-6-i686 23.1 KiB 116K / s 00:00 [----------------------] 100%
scrot-0.8.17-2-i686 16.6 KiB 923K / s 00:00 [----------------------] 100%
(2/2) checking the deposit keys [----------------------] 100%
warning: Public keyring not found; have you run 'pacman-key --init'?
downloading the necessary keys ...
warning: key 5FDCA472AB93292BC678FD59255A76DB9A12601A, "Erich Eckner (just to sign arch packages) <arch@eckner.net>" found on keyserver, keyring is not writable
error: the required key is not present in the warehouse
error: the operation could not be performed (unexpected error)
Errors occurred, so the packages were not updated
[judd @ Arch ~] $ Offline
**[Solved]**
Missing:
systemctl enable pacman-init.serviceAfter this, the .tar.gz of package-query and yaourt were installed without problems.
@deep42thought !
Thank you very much and very kind for giving me your time and attention !
A cordial greeting.
My respects.
Last edited by judd (2018-04-24 00:42:49)
Offline
Nice, that it works now, but you should need to enable that service only if this is some kind of live/install medium where all changes to /etc/pacman.d are undone upon reboot.
pacman-init.service basically does the "pacman-key --populate" step I gave you in the beginning.
Offline
Nice, that it works now, but you should need to enable that service only if this is some kind of live/install medium where all changes to /etc/pacman.d are undone upon reboot.
pacman-init.service basically does the "pacman-key --populate" step I gave you in the beginning.
I understand, now well; I see that for every package I want to install, I must first update/call pacman keys with "pacman-key --populate", which is normal and logical for pacman to install securely. It is that one gets used in 64 bits not to do it so often.
Otherwise, everything works without shrillness or conflicts.
PS: know how to excuse my bad English, since I write with a translator. My native language is Spanish (Es-ar)
Offline
Pages: 1