You are not logged in.
Pages: 1
ok so i have a dell dimension 4600i it has a single core p4 2.66ghz proc, 4gb of ram, a nvidia nv34 (geforce fx 5200) ethernet that works and wifi that works but having trouble getting "systemctl enable and start sddm" it throws a black screen with "-" blinking and stays there. i had mx 17.1 installed on this system and it worked just fine. the driver for mx-17.1 was nouveau. it unloaded nv, modsetting, fbdev, vesa. the res is 1360x768. please help i want arch and not mx-17.1
Offline
Please do not double post.
We'll need some logs to determine what's going on. Can you post your Xorg.0.log, dmesg and syslog?
Offline
what is the command for those?
Offline
I am experiencing the same issue.
Here's my Xorg.0.log:
[ 642.433]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 642.433] X Protocol Version 11, Revision 0
[ 642.433] Build Operating System: Linux 4.16.3-1-ARCH i686
[ 642.433] Current Operating System: Linux Susan-PC 4.16.6-1.0-ARCH #1 SMP PREEMPT Wed May 2 23:35:27 CEST 2018 i686
[ 642.433] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b1099bb-fad0-45e9-9806-b2de458766d2 rw quiet
[ 642.433] Build Date: 26 April 2018 02:40:49PM
[ 642.433]
[ 642.433] Current version of pixman: 0.34.0
[ 642.433] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 642.434] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 642.434] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 13 10:53:05 2018
[ 642.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 642.434] (==) No Layout section. Using the first Screen section.
[ 642.434] (==) No screen section available. Using defaults.
[ 642.434] (**) |-->Screen "Default Screen Section" (0)
[ 642.434] (**) | |-->Monitor "<default monitor>"
[ 642.435] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 642.435] (==) Automatically adding devices
[ 642.435] (==) Automatically enabling devices
[ 642.435] (==) Automatically adding GPU devices
[ 642.435] (==) Automatically binding GPU devices
[ 642.435] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 642.435] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 642.435] Entry deleted from font path.
[ 642.435] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 642.435] Entry deleted from font path.
[ 642.435] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 642.435] Entry deleted from font path.
[ 642.435] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 642.435] Entry deleted from font path.
[ 642.435] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 642.435] Entry deleted from font path.
[ 642.435] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 642.435] Entry deleted from font path.
[ 642.435] (==) FontPath set to:
[ 642.435] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 642.435] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 642.435] (II) Loader magic: 0x6976c0
[ 642.435] (II) Module ABI versions:
[ 642.435] X.Org ANSI C Emulation: 0.4
[ 642.435] X.Org Video Driver: 23.0
[ 642.435] X.Org XInput driver : 24.1
[ 642.435] X.Org Server Extension : 10.0
[ 642.437] (++) using VT number 7
[ 642.437] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 642.438] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 642.444] (--) PCI:*(0:1:0:0) 1002:5964:1787:5964 rev 1, Mem @ 0xf0000000/134217728, 0xfe9e0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
[ 642.444] (--) PCI: (0:1:0:1) 1002:5d44:1787:5965 rev 1, Mem @ 0xe8000000/134217728, 0xfe9f0000/65536
[ 642.444] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 642.444] (II) LoadModule: "glx"
[ 642.445] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 642.447] (II) Module glx: vendor="X.Org Foundation"
[ 642.447] compiled for 1.19.6, module version = 1.0.0
[ 642.447] ABI class: X.Org Server Extension, version 10.0
[ 642.447] (==) Matched ati as autoconfigured driver 0
[ 642.447] (==) Matched ati as autoconfigured driver 1
[ 642.448] (==) Matched modesetting as autoconfigured driver 2
[ 642.448] (==) Matched fbdev as autoconfigured driver 3
[ 642.448] (==) Matched vesa as autoconfigured driver 4
[ 642.448] (==) Assigned the driver to the xf86ConfigLayout
[ 642.448] (II) LoadModule: "ati"
[ 642.448] (WW) Warning, couldn't open module ati
[ 642.448] (II) UnloadModule: "ati"
[ 642.448] (II) Unloading ati
[ 642.448] (EE) Failed to load module "ati" (module does not exist, 0)
[ 642.448] (II) LoadModule: "modesetting"
[ 642.448] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 642.448] (II) Module modesetting: vendor="X.Org Foundation"
[ 642.448] compiled for 1.19.6, module version = 1.19.6
[ 642.448] Module class: X.Org Video Driver
[ 642.448] ABI class: X.Org Video Driver, version 23.0
[ 642.448] (II) LoadModule: "fbdev"
[ 642.449] (WW) Warning, couldn't open module fbdev
[ 642.449] (II) UnloadModule: "fbdev"
[ 642.449] (II) Unloading fbdev
[ 642.449] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 642.449] (II) LoadModule: "vesa"
[ 642.449] (WW) Warning, couldn't open module vesa
[ 642.449] (II) UnloadModule: "vesa"
[ 642.449] (II) Unloading vesa
[ 642.449] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 642.449] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 642.450] (II) modeset(0): using drv /dev/dri/card0
[ 642.450] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 642.450] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 642.450] (==) modeset(0): RGB weight 888
[ 642.450] (==) modeset(0): Default visual is TrueColor
[ 642.450] (II) Loading sub module "glamoregl"
[ 642.450] (II) LoadModule: "glamoregl"
[ 642.450] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 642.452] (II) Module glamoregl: vendor="X.Org Foundation"
[ 642.452] compiled for 1.19.6, module version = 1.0.0
[ 642.452] ABI class: X.Org ANSI C Emulation, version 0.4
[ 642.452] (II) glamor: OpenGL accelerated X.org driver based.
[ 642.468] (II) glamor: EGL version 1.4 (DRI2):
[ 642.481] (II) modeset(0): glamor initialized
[ 642.512] (II) modeset(0): Output VGA-1 has no monitor section
[ 642.524] (II) modeset(0): Output DVI-I-1 has no monitor section
[ 642.527] (II) modeset(0): Output SVIDEO-1 has no monitor section
[ 642.558] (II) modeset(0): EDID for output VGA-1
[ 642.558] (II) modeset(0): Manufacturer: DEL Model: a00c Serial#: 808671315
[ 642.558] (II) modeset(0): Year: 2005 Week: 23
[ 642.558] (II) modeset(0): EDID Version: 1.3
[ 642.558] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 642.558] (II) modeset(0): Sync: Separate
[ 642.558] (II) modeset(0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 642.558] (II) modeset(0): Gamma: 2.20
[ 642.558] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 642.558] (II) modeset(0): Default color space is primary color space
[ 642.559] (II) modeset(0): First detailed timing is preferred mode
[ 642.559] (II) modeset(0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582
[ 642.559] (II) modeset(0): blueX: 0.149 blueY: 0.088 whiteX: 0.312 whiteY: 0.328
[ 642.559] (II) modeset(0): Supported established timings:
[ 642.559] (II) modeset(0): 720x400@70Hz
[ 642.559] (II) modeset(0): 640x480@60Hz
[ 642.559] (II) modeset(0): 640x480@72Hz
[ 642.559] (II) modeset(0): 640x480@75Hz
[ 642.559] (II) modeset(0): 800x600@56Hz
[ 642.559] (II) modeset(0): 800x600@60Hz
[ 642.559] (II) modeset(0): 800x600@72Hz
[ 642.559] (II) modeset(0): 800x600@75Hz
[ 642.559] (II) modeset(0): 1024x768@60Hz
[ 642.559] (II) modeset(0): 1024x768@70Hz
[ 642.559] (II) modeset(0): 1024x768@75Hz
[ 642.559] (II) modeset(0): Manufacturer's mask: 0
[ 642.559] (II) modeset(0): Supported detailed timing:
[ 642.559] (II) modeset(0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 642.559] (II) modeset(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 642.559] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 642.559] (II) modeset(0): Serial No: 6418056B03XS
[ 642.559] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
[ 642.559] (II) modeset(0): Monitor name: DELL E153FP
[ 642.559] (II) modeset(0): EDID (in hex):
[ 642.559] (II) modeset(0): 00ffffffffffff0010ac0ca053583330
[ 642.559] (II) modeset(0): 170f0103681e17782eb060a1584f9526
[ 642.559] (II) modeset(0): 165054afce0001010101010101010101
[ 642.559] (II) modeset(0): 01010101010164190040410026301888
[ 642.559] (II) modeset(0): 360030e410000018000000ff00363431
[ 642.559] (II) modeset(0): 3830353642303358530a000000fd0038
[ 642.559] (II) modeset(0): 4c1e3f08000a202020202020000000fc
[ 642.559] (II) modeset(0): 0044454c4c204531353346500a200011
[ 642.559] (II) modeset(0): Printing probed modes for output VGA-1
[ 642.559] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 642.559] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 642.559] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 642.559] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 642.560] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 642.560] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 642.560] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 642.560] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 642.560] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 642.560] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 642.560] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 642.571] (II) modeset(0): EDID for output DVI-I-1
[ 642.574] (II) modeset(0): EDID for output SVIDEO-1
[ 642.574] (II) modeset(0): Output VGA-1 connected
[ 642.574] (II) modeset(0): Output DVI-I-1 disconnected
[ 642.574] (II) modeset(0): Output SVIDEO-1 disconnected
[ 642.574] (II) modeset(0): Using exact sizes for initial modes
[ 642.574] (II) modeset(0): Output VGA-1 using initial mode 1024x768 +0+0
[ 642.574] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 642.574] (==) modeset(0): DPI set to (96, 96)
[ 642.574] (II) Loading sub module "fb"
[ 642.574] (II) LoadModule: "fb"
[ 642.574] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 642.575] (II) Module fb: vendor="X.Org Foundation"
[ 642.575] compiled for 1.19.6, module version = 1.0.0
[ 642.575] ABI class: X.Org ANSI C Emulation, version 0.4
[ 642.575] (==) Depth 24 pixmap format is 32 bpp
[ 642.576] Require OpenGL version 2.1 or later.
[ 642.576] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
[ 642.576] (EE)
Fatal server error:
[ 642.576] (EE) AddScreen/ScreenInit failed for driver 0
[ 642.576] (EE)
[ 642.576] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 642.576] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 642.576] (EE)
[ 642.590] (EE) Server terminated with error (1). Closing log file.
My dmesg:
[ 0.000000] Linux version 4.16.6-1.0-ARCH (builduser@slave) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Wed May 2 23:35:27 CEST 2018
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff70000-0x000000007ff71fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ff72000-0x000000007ff92fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff93000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fecf0000-0x00000000fecf0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Dell Computer Corporation Dimension 4600i /0F4491, BIOS A10 05/17/2004
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ff70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [(ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x12ffffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.000000] BRK [0x12b77000, 0x12b77fff] PGTABLE
[ 0.000000] BRK [0x12b78000, 0x12b79fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36fc1000-0x377d7fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x35fe7000-0x367fd840]
[ 0.000000] Move RAMDISK from [mem 0x36fc1000-0x377d7840] to [mem 0x35fe7000-0x367fd840]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FEBA0 000014 (v00 DELL )
[ 0.000000] ACPI: RSDT 0x00000000000FD1B2 000034 (v01 DELL 4600 00000007 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000000FD1E6 000074 (v01 DELL 4600 00000007 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000FFFCF632 0024C9 (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0x000000007FF70000 000040
[ 0.000000] ACPI: SSDT 0x00000000FFFD1AFB 0000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 0x00000000000FD25A 00006C (v01 DELL 4600 00000007 ASL 00000061)
[ 0.000000] ACPI: BOOT 0x00000000000FD2C6 000028 (v01 DELL 4600 00000007 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1175MB HIGHMEM available.
[ 0.000000] 871MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 367fe000
[ 0.000000] low ram: 0 - 367fe000
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] BRK [0x12b7a000, 0x12b7afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000367fdfff]
[ 0.000000] HighMem [mem 0x00000000367fe000-0x000000007ff6ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff6ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff6ffff]
[ 0.000000] On node 0 totalpages: 524047
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] Normal zone: 2140 pages used for memmap
[ 0.000000] Normal zone: 219134 pages, LIFO batch:31
[ 0.000000] HighMem zone: 300914 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 97 pages
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x82/0x433 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s87244 r0 d31540 u118784
[ 0.000000] pcpu-alloc: s87244 r0 d31540 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521867
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b1099bb-fad0-45e9-9806-b2de458766d2 rw quiet
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] BRK [0x12b7b000, 0x12b7bfff] PGTABLE
[ 0.000000] BRK [0x12b7c000, 0x12b7cfff] PGTABLE
[ 0.000000] microcode: microcode updated early to revision 0x17, date = 2005-04-21
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000367fe:0007ff70)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2054336K/2096188K available (6613K kernel code, 658K rwdata, 2812K rodata, 796K init, 448K bss, 41852K reserved, 0K cma-reserved, 1203656K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffab5000 - 0xfffff000 (5416 kB)
cpu_entry : 0xfec00000 - 0xff5c1000 (9988 kB)
pkmap : 0xfe800000 - 0xfec00000 (4096 kB)
vmalloc : 0xf6ffe000 - 0xfe7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf67fe000 ( 871 MB)
.init : 0xd29ed000 - 0xd2ab4000 ( 796 kB)
.data : 0xd26755dc - 0xd29ddb80 (3489 kB)
.text : 0xd2000000 - 0xd26755dc (6613 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 29479 entries in 58 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003333] APIC: Switch to symmetric I/O mode setup
[ 0.003333] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019999] tsc: Fast TSC calibration using PIT
[ 0.023333] tsc: Detected 2792.809 MHz processor
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2841b773402, max_idle_ns: 440795203611 ns
[ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.35 BogoMIPS (lpj=9309363)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.023333] Security Framework initialized
[ 0.023333] Yama: becoming mindful.
[ 0.023333] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.023333] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.023333] CPU0: Hyper-Threading is disabled
[ 0.023333] mce: CPU supports 4 MCE banks
[ 0.023333] CPU0: Thermal monitoring enabled (TM1)
[ 0.023333] process: using mwait in idle threads
[ 0.023333] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.023333] Spectre V2 : Mitigation: Full generic retpoline
[ 0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.039999] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz (family: 0xf, model: 0x3, stepping: 0x4)
[ 0.050022] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.050040] ... version: 0
[ 0.050041] ... bit width: 40
[ 0.050043] ... generic registers: 18
[ 0.050045] ... value mask: 000000ffffffffff
[ 0.050046] ... max period: 0000007fffffffff
[ 0.050047] ... fixed-purpose events: 0
[ 0.050049] ... event mask: 000000000003ffff
[ 0.056676] Hierarchical SRCU implementation.
[ 0.076760] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.083342] smp: Bringing up secondary CPUs ...
[ 0.083345] smp: Brought up 1 node, 1 CPU
[ 0.083348] smpboot: Max logical packages: 4
[ 0.083351] smpboot: Total of 1 processors activated (5587.35 BogoMIPS)
[ 0.084237] devtmpfs: initialized
[ 0.086734] PM: Registering ACPI NVS region [mem 0x7ff70000-0x7ff71fff] (8192 bytes)
[ 0.086893] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.086900] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.087024] pinctrl core: initialized pinctrl subsystem
[ 0.087203] RTC time: 15:02:03, date: 05/13/18
[ 0.087370] NET: Registered protocol family 16
[ 0.090024] cpuidle: using governor ladder
[ 0.090036] cpuidle: using governor menu
[ 0.090102] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 0.090104] Simple Boot Flag at 0x7a set to 0x1
[ 0.090173] ACPI: bus type PCI registered
[ 0.090177] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.091546] PCI: PCI BIOS revision 2.10 entry at 0xfbb10, last bus=2
[ 0.091548] PCI: Using configuration type 1 for base access
[ 0.096771] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.106901] ACPI: Added _OSI(Module Device)
[ 0.106904] ACPI: Added _OSI(Processor Device)
[ 0.106906] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.106908] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130608] ACPI: Interpreter enabled
[ 0.130672] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.130674] ACPI: Using IOAPIC for interrupt routing
[ 0.130774] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.131033] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.185447] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.185460] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.185472] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.185478] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.187150] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.187154] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.187157] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.187160] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.187162] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored)
[ 0.187165] PCI: root bus 00: using default resources
[ 0.187458] PCI host bridge to bus 0000:00
[ 0.187462] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.187466] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.187470] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.187489] pci 0000:00:00.0: [8086:2570] type 00 class 0x060000
[ 0.187496] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.187513] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe1ffffff pref]
[ 0.187724] pci 0000:00:01.0: [8086:2571] type 01 class 0x060400
[ 0.187911] pci 0000:00:06.0: [8086:2576] type 00 class 0x088000
[ 0.187931] pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
[ 0.188155] pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
[ 0.188213] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
[ 0.188406] pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
[ 0.188465] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
[ 0.188655] pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
[ 0.188713] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
[ 0.188899] pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
[ 0.188956] pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f]
[ 0.189156] pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
[ 0.189186] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[ 0.189295] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.189446] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ 0.189656] pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
[ 0.189740] pci 0000:00:1f.0: HPET at 0xfed00000
[ 0.189750] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.189756] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO
[ 0.190030] pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
[ 0.190053] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.190065] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.190077] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.190089] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.190102] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.190114] pci 0000:00:1f.1: reg 0x24: [mem 0xfebffc00-0xfebfffff]
[ 0.190130] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.190133] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.190136] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.190139] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.190291] pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018f
[ 0.190312] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.190323] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
[ 0.190334] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
[ 0.190345] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
[ 0.190355] pci 0000:00:1f.2: reg 0x20: [io 0xfea0-0xfeaf]
[ 0.190518] pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
[ 0.190576] pci 0000:00:1f.3: reg 0x20: [io 0xeda0-0xedbf]
[ 0.190748] pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
[ 0.190772] pci 0000:00:1f.5: reg 0x10: [io 0xee00-0xeeff]
[ 0.190783] pci 0000:00:1f.5: reg 0x14: [io 0xedc0-0xedff]
[ 0.190795] pci 0000:00:1f.5: reg 0x18: [mem 0xfebffa00-0xfebffbff]
[ 0.190806] pci 0000:00:1f.5: reg 0x1c: [mem 0xfebff900-0xfebff9ff]
[ 0.190867] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.191056] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[ 0.191079] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.191090] pci 0000:01:00.0: reg 0x14: [io 0xde00-0xdeff]
[ 0.191100] pci 0000:01:00.0: reg 0x18: [mem 0xfe9e0000-0xfe9effff]
[ 0.191130] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[ 0.191170] pci 0000:01:00.0: supports D1 D2
[ 0.191236] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[ 0.191256] pci 0000:01:00.1: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[ 0.191267] pci 0000:01:00.1: reg 0x14: [mem 0xfe9f0000-0xfe9fffff]
[ 0.191335] pci 0000:01:00.1: supports D1 D2
[ 0.191431] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.191437] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.191442] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.191447] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xf7ffffff pref]
[ 0.191506] pci 0000:02:01.0: [14f1:2f20] type 00 class 0x078000
[ 0.191531] pci 0000:02:01.0: reg 0x10: [mem 0xfe8f0000-0xfe8fffff]
[ 0.191543] pci 0000:02:01.0: reg 0x14: [io 0xcf38-0xcf3f]
[ 0.191621] pci 0000:02:01.0: PME# supported from D3hot D3cold
[ 0.191705] pci 0000:02:08.0: [8086:1050] type 00 class 0x020000
[ 0.191729] pci 0000:02:08.0: reg 0x10: [mem 0xfe8ef000-0xfe8effff]
[ 0.191741] pci 0000:02:08.0: reg 0x14: [io 0xcf40-0xcf7f]
[ 0.191819] pci 0000:02:08.0: supports D1 D2
[ 0.191822] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191914] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.191921] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.191927] pci 0000:00:1e.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.191932] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.191936] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.191951] pci_bus 0000:00: on NUMA node 0
[ 0.202749] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.203266] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 0.203794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.204311] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.204827] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.205358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.205874] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.206387] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.206749] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.206754] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.206757] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.206759] vgaarb: loaded
[ 0.207071] EDAC MC: Ver: 3.0.0
[ 0.213377] PCI: Using ACPI for IRQ routing
[ 0.213382] PCI: pci_cache_line_size set to 64 bytes
[ 0.213448] e820: reserve RAM buffer [mem 0x7ff70000-0x7fffffff]
[ 0.213646] NetLabel: Initializing
[ 0.213648] NetLabel: domain hash size = 128
[ 0.213649] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.213673] NetLabel: unlabeled traffic allowed by default
[ 0.214616] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.214627] hpet clockevent registered
[ 0.214637] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.214644] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.214652] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216742] clocksource: Switched to clocksource tsc-early
[ 0.237660] VFS: Disk quotas dquot_6.6.0
[ 0.237699] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.237842] pnp: PnP ACPI init
[ 0.242199] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.242205] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.242211] system 00:00: [mem 0x01000000-0x7ff6ffff] could not be reserved
[ 0.242217] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
[ 0.242222] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.242226] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.242229] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.242233] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved
[ 0.242237] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.242240] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.242253] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.245718] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.249077] pnp 00:02: [dma 2]
[ 0.249346] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.250482] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.257243] pnp 00:04: [dma 0 disabled]
[ 0.257814] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.259689] pnp 00:05: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.259694] pnp 00:05: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.259745] system 00:05: [io 0x0c00-0x0c7f] has been reserved
[ 0.259757] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.260748] pnp: PnP ACPI: found 6 devices
[ 0.298510] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.298542] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.298549] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.298555] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
[ 0.298561] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xf7ffffff pref]
[ 0.298569] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.298574] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.298580] pci 0000:00:1e.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.298592] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.298596] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.298599] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.298602] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[ 0.298605] pci_bus 0000:01: resource 2 [mem 0xe2000000-0xf7ffffff pref]
[ 0.298608] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.298611] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.298614] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.298617] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.298717] NET: Registered protocol family 2
[ 0.299051] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.299062] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.299084] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.299119] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.299180] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.299190] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.299273] NET: Registered protocol family 1
[ 0.302227] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.302248] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.302255] PCI: CLS 64 bytes, default 64
[ 0.302353] Unpacking initramfs...
[ 0.522959] Freeing initrd memory: 8284K
[ 0.523134] apm: BIOS not found.
[ 0.523226] Scanning for low memory corruption every 60 seconds
[ 0.524171] Initialise system trusted keyrings
[ 0.524192] Key type blacklist registered
[ 0.524284] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.526862] zbud: loaded
[ 0.529719] Key type asymmetric registered
[ 0.529721] Asymmetric key parser 'x509' registered
[ 0.529743] bounce: pool size: 64 pages
[ 0.529813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.533283] io scheduler noop registered
[ 0.533285] io scheduler deadline registered
[ 0.533381] io scheduler cfq registered (default)
[ 0.533384] io scheduler mq-deadline registered
[ 0.533385] io scheduler kyber registered
[ 0.533475] io scheduler bfq registered
[ 0.534051] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.534053] vesafb: scrolling: redraw
[ 0.534057] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.534082] vesafb: framebuffer at 0xf0000000, mapped to 0x(ptrval), using 3072k, total 3072k
[ 0.614963] Console: switching to colour frame buffer device 128x48
[ 0.695548] fb0: VESA VGA frame buffer device
[ 0.695665] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.695703] ACPI: Power Button [VBTN]
[ 0.695808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.695830] ACPI: Power Button [PWRF]
[ 0.700053] isapnp: Scanning for PnP cards...
[ 1.013063] isapnp: No Plug & Play device found
[ 1.013210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.033429] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.033848] NET: Registered protocol family 10
[ 1.046430] Segment Routing with IPv6
[ 1.046480] NET: Registered protocol family 17
[ 1.050169] RAS: Correctable Errors collector initialized.
[ 1.050243] microcode: sig=0xf34, pf=0x4, revision=0x17
[ 1.050324] microcode: Microcode Update Driver: v2.2.
[ 1.050332] Using IPI No-Shortcut mode
[ 1.050343] sched_clock: Marking stable (1050007073, 0)->(1131096820, -81089747)
[ 1.050609] registered taskstats version 1
[ 1.050631] Loading compiled-in X.509 certificates
[ 1.050661] zswap: loaded using pool lzo/zbud
[ 1.056847] Key type big_key registered
[ 1.057155] Magic number: 2:522:32
[ 1.057224] hctosys: unable to open rtc device (rtc0)
[ 1.062753] Freeing unused kernel memory: 796K
[ 1.062835] Write protecting the kernel text: 6616k
[ 1.062912] Write protecting the kernel read-only data: 2828k
[ 1.276531] i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 1.276535] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.277542] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.295705] ACPI: bus type USB registered
[ 1.295755] usbcore: registered new interface driver usbfs
[ 1.295782] usbcore: registered new interface driver hub
[ 1.300627] FDC 0 is a post-1991 82077
[ 1.310153] usbcore: registered new device driver usb
[ 1.311853] SCSI subsystem initialized
[ 1.312988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.313315] ehci-pci: EHCI PCI platform driver
[ 1.314438] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.314452] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.314471] ehci-pci 0000:00:1d.7: debug port 1
[ 1.323432] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.323469] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa80800
[ 1.327153] libata version 3.00 loaded.
[ 1.336737] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.336884] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.336888] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.336891] usb usb1: Product: EHCI Host Controller
[ 1.336894] usb usb1: Manufacturer: Linux 4.16.6-1.0-ARCH ehci_hcd
[ 1.336897] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.337148] hub 1-0:1.0: USB hub found
[ 1.337165] hub 1-0:1.0: 8 ports detected
[ 1.337817] ata_piix 0000:00:1f.1: version 2.13
[ 1.339588] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.345175] scsi host0: ata_piix
[ 1.352112] scsi host1: ata_piix
[ 1.352229] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.352233] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.352813] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.358820] scsi host2: ata_piix
[ 1.365862] scsi host3: ata_piix
[ 1.365973] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
[ 1.365977] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
[ 1.366487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.366499] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.366509] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.366549] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 1.366725] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.366729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.366732] usb usb2: Product: UHCI Host Controller
[ 1.366735] usb usb2: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[ 1.366737] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.366968] hub 2-0:1.0: USB hub found
[ 1.366986] hub 2-0:1.0: 2 ports detected
[ 1.367558] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.367569] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.367578] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.367612] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 1.367724] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.367728] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.367731] usb usb3: Product: UHCI Host Controller
[ 1.367733] usb usb3: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[ 1.367736] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.367941] hub 3-0:1.0: USB hub found
[ 1.367957] hub 3-0:1.0: 2 ports detected
[ 1.368486] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.368496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.368504] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.368526] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.369054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.369059] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369062] usb usb4: Product: UHCI Host Controller
[ 1.369064] usb usb4: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[ 1.369067] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.369297] hub 4-0:1.0: USB hub found
[ 1.369314] hub 4-0:1.0: 2 ports detected
[ 1.369888] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.369898] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.369907] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.369932] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
[ 1.370070] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.370074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.370077] usb usb5: Product: UHCI Host Controller
[ 1.370080] usb usb5: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[ 1.370082] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.370291] hub 5-0:1.0: USB hub found
[ 1.371339] hub 5-0:1.0: 2 ports detected
[ 1.416294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.515915] ata2.00: ATAPI: _NEC DVD+/-RW ND-3530A, 102B, max UDMA/33
[ 1.520543] ata2.00: configured for UDMA/33
[ 1.528289] ata1.00: ATA-6: WDC WD1600BB-22GUC0, 08.02D08, max UDMA/100
[ 1.528293] ata1.00: 312581808 sectors, multi 8: LBA48
[ 1.546696] tsc: Refined TSC clocksource calibration: 2793.000 MHz
[ 1.546706] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28426c46e09, max_idle_ns: 440795320975 ns
[ 1.546724] clocksource: Switched to clocksource tsc
[ 1.551517] ata1.00: configured for UDMA/100
[ 1.551777] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BB-22G 2D08 PQ: 0 ANSI: 5
[ 1.554919] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-3530A 102B PQ: 0 ANSI: 5
[ 1.555062] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.555088] sd 0:0:0:0: [sda] Write Protect is off
[ 1.555092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.555135] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.579216] sda: sda1 sda2
[ 1.580333] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.581377] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.581381] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.582030] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.830051] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.016995] usb 2-2: New USB device found, idVendor=276d, idProduct=1119
[ 2.016999] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.017002] usb 2-2: Product: G Mouse
[ 2.017005] usb 2-2: Manufacturer: YSTEK
[ 2.024313] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.039307] usbcore: registered new interface driver usbhid
[ 2.039310] usbhid: USB HID core driver
[ 2.042226] input: YSTEK G Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:276D:1119.0001/input/input3
[ 2.042458] hid-generic 0003:276D:1119.0001: input,hidraw0: USB HID v1.10 Mouse [YSTEK G Mouse] on usb-0000:00:1d.0-2/input0
[ 6.208550] random: fast init done
[ 6.678693] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.056320] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 8.056541] systemd[1]: Detected architecture x86.
[ 8.074328] systemd[1]: Set hostname to <Susan-PC>.
[ 8.594203] random: crng init done
[ 9.354922] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.355168] systemd[1]: Listening on LVM2 poll daemon socket.
[ 9.411208] systemd[1]: Created slice system-getty.slice.
[ 9.411360] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 9.411861] systemd[1]: Created slice User and Session Slice.
[ 9.411924] systemd[1]: Reached target Remote File Systems.
[ 9.412054] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.840935] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 10.202474] systemd-journald[189]: Received request to flush runtime journal from PID 1
[ 13.483632] parport_pc 00:04: reported by Plug and Play ACPI
[ 13.483719] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 13.675225] rtc_cmos 00:01: RTC can wake from S4
[ 13.675411] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 13.675448] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[ 14.025088] intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 14.103815] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.250504] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.258598] mousedev: PS/2 mouse device common for all mice
[ 14.315374] Linux agpgart interface v0.103
[ 14.450788] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 14.456183] agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 14.776010] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 15.130476] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 15.130480] e100: Copyright(c) 1999-2006 Intel Corporation
[ 15.148688] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 15.166880] e100 0000:02:08.0 eth0: addr 0xfe8ef000, irq 20, MAC addr 00:11:11:20:55:be
[ 15.198423] ppdev: user-space parallel port driver
[ 15.207377] iTCO_vendor_support: vendor-support=0
[ 15.210487] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.210554] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 15.211277] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.854939] Adding 4194300k swap on /dev/sda1. Priority:-2 extents:1 across:4194300k FS
[ 15.896853] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 56521 usecs (2723 samples)
[ 15.896859] snd_intel8x0 0000:00:1f.5: clocking to 48000
[ 15.950082] [drm] radeon kernel modesetting enabled.
[ 15.954436] checking generic (f0000000 300000) vs hw (f0000000 8000000)
[ 15.954441] fb: switching to radeondrmfb from VESA VGA
[ 15.954487] Console: switching to colour dummy device 80x25
[ 15.960455] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1787:0x5964 0x01).
[ 15.960588] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 15.960604] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 15.960638] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 15.960655] radeon 0000:01:00.0: GTT: 32M 0xE0000000 - 0xE1FFFFFF
[ 15.960659] [drm] Generation 2 PCI interface, using max accessible memory
[ 15.960665] radeon 0000:01:00.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (128M used)
[ 15.960678] [drm] Detected VRAM RAM=128M, BAR=128M
[ 15.960680] [drm] RAM width 64bits DDR
[ 15.964479] [TTM] Zone kernel: Available graphics memory: 429880 kiB
[ 15.964482] [TTM] Zone highmem: Available graphics memory: 1031708 kiB
[ 15.964484] [TTM] Initializing pool allocator
[ 15.964492] [TTM] Initializing DMA pool allocator
[ 15.964533] [drm] radeon: 128M of VRAM memory ready
[ 15.964536] [drm] radeon: 32M of GTT memory ready.
[ 15.973974] e100 0000:02:08.0 enp2s8: renamed from eth0
[ 15.982340] radeon 0000:01:00.0: WB disabled
[ 15.982350] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0x853ef928
[ 15.982354] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.982355] [drm] Driver supports precise vblank timestamp query.
[ 15.982370] [drm] radeon: irq initialized.
[ 15.982394] [drm] Loading R200 Microcode
[ 16.276442] [drm] radeon: ring at 0x00000000E0001000
[ 16.276468] [drm] ring test succeeded in 0 usecs
[ 16.277022] [drm] ib test succeeded in 0 usecs
[ 16.278630] [drm] Radeon Display Connectors
[ 16.278632] [drm] Connector 0:
[ 16.278634] [drm] VGA-1
[ 16.278637] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 16.278638] [drm] Encoders:
[ 16.278640] [drm] CRT1: INTERNAL_DAC1
[ 16.278641] [drm] Connector 1:
[ 16.278642] [drm] DVI-I-1
[ 16.278644] [drm] HPD1
[ 16.278646] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 16.278647] [drm] Encoders:
[ 16.278648] [drm] CRT2: INTERNAL_DAC2
[ 16.278650] [drm] DFP1: INTERNAL_TMDS1
[ 16.278651] [drm] Connector 2:
[ 16.278652] [drm] SVIDEO-1
[ 16.278653] [drm] Encoders:
[ 16.278654] [drm] TV1: INTERNAL_DAC2
[ 16.341333] [drm] fb mappable at 0xF0040000
[ 16.341337] [drm] vram apper at 0xF0000000
[ 16.341338] [drm] size 3145728
[ 16.341340] [drm] fb depth is 24
[ 16.341341] [drm] pitch is 4096
[ 16.341684] fbcon: radeondrmfb (fb0) is primary device
[ 16.408494] Console: switching to colour frame buffer device 128x48
[ 16.425617] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 16.443439] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 17.101045] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 17.103488] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 17.103589] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 17.959817] 8021q: 802.1Q VLAN Support v1.8
[ 18.084809] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 18.096884] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 18.096951] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 18.096955] cfg80211: failed to load regulatory.db
I'm going to assume you just want the sddm logs. Here's the last 100 lines:
-- Logs begin at Sun 2018-05-13 10:04:27 EDT, end at Sun 2018-05-13 11:32:09 EDT. --
May 13 11:25:31 Susan-PC systemd[1]: Started Simple Desktop Display Manager.
May 13 11:25:32 Susan-PC sddm[357]: Initializing...
May 13 11:25:32 Susan-PC sddm[357]: Logind interface found
May 13 11:25:32 Susan-PC sddm[357]: Starting...
May 13 11:25:32 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:32 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:32 Susan-PC sddm[357]: Display server starting...
May 13 11:25:32 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{53c33077-fd93-4f50-b387-5d2bd0c0f103} -background none -noreset -displayfd 17 -seat seat0 vt1
May 13 11:25:34 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:34 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:34 Susan-PC sddm[357]: Display server started.
May 13 11:25:34 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:34 Susan-PC sddm[357]: Socket server started.
May 13 11:25:34 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:34 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:34 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{53c33077-fd93-4f50-b387-5d2bd0c0f103}"
May 13 11:25:34 Susan-PC sddm-helper[363]: [PAM] Starting...
May 13 11:25:34 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:34 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:34 Susan-PC sddm-helper[363]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
May 13 11:25:34 Susan-PC sddm-helper[363]: [PAM] Authenticating...
May 13 11:25:34 Susan-PC sddm-helper[363]: [PAM] returning.
May 13 11:25:34 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:34 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:34 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:34 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:34 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:34 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:34 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:34 Susan-PC sddm[357]: Display server starting...
May 13 11:25:34 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{aa9d0899-6e83-4aa9-9c96-ac2f52670e1f} -background none -noreset -displayfd 20 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:35 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:35 Susan-PC sddm[357]: Display server started.
May 13 11:25:35 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:35 Susan-PC sddm[357]: Socket server started.
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:35 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{aa9d0899-6e83-4aa9-9c96-ac2f52670e1f}"
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:35 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:35 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:35 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Display server starting...
May 13 11:25:35 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{25acafee-fbf6-468d-bbfb-094dae7b2364} -background none -noreset -displayfd 18 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm-helper[377]: [PAM] Starting...
May 13 11:25:35 Susan-PC sddm-helper[377]: [PAM] Authenticating...
May 13 11:25:35 Susan-PC sddm-helper[377]: [PAM] returning.
May 13 11:25:35 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:35 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:35 Susan-PC sddm[357]: Display server started.
May 13 11:25:35 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:35 Susan-PC sddm[357]: Socket server started.
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:35 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{25acafee-fbf6-468d-bbfb-094dae7b2364}"
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:35 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:35 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:35 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Display server starting...
May 13 11:25:35 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{3d328390-e1a7-4952-8ad3-302fe0f0a7f6} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm-helper[383]: [PAM] Starting...
May 13 11:25:35 Susan-PC sddm-helper[383]: [PAM] Authenticating...
May 13 11:25:35 Susan-PC sddm-helper[383]: [PAM] returning.
May 13 11:25:35 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:35 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:35 Susan-PC sddm[357]: Display server started.
May 13 11:25:35 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:35 Susan-PC sddm[357]: Socket server started.
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:35 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{3d328390-e1a7-4952-8ad3-302fe0f0a7f6}"
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:35 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:35 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:35 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Display server starting...
May 13 11:25:35 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{dcfcefed-9b8e-49a4-8d49-77fa0fa0ae22} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm-helper[389]: [PAM] Starting...
May 13 11:25:35 Susan-PC sddm-helper[389]: [PAM] Authenticating...
[root@Susan-PC ~]# journalctl --since "20 min ago" -u sddm | tail -n 100
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{0af58317-aea5-45ef-b47d-5a704089c912} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[907]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[907]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[907]: [PAM] returning.
May 13 11:25:56 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:56 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:56 Susan-PC sddm[357]: Display server started.
May 13 11:25:56 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:56 Susan-PC sddm[357]: Socket server started.
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:56 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{0af58317-aea5-45ef-b47d-5a704089c912}"
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:56 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:56 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{95b83ef8-f7d5-4090-9099-a4c01cbc6a8f} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[913]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[913]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[913]: [PAM] returning.
May 13 11:25:56 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:56 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:56 Susan-PC sddm[357]: Display server started.
May 13 11:25:56 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:56 Susan-PC sddm[357]: Socket server started.
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:56 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{95b83ef8-f7d5-4090-9099-a4c01cbc6a8f}"
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:56 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:56 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{98a984d7-07f0-48e6-a9e4-e283f8f99d7e} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[919]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[919]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[919]: [PAM] returning.
May 13 11:25:56 Susan-PC systemd[1]: Stopping Simple Desktop Display Manager...
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:56 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:56 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:56 Susan-PC sddm[357]: Display server started.
May 13 11:25:56 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:56 Susan-PC sddm[357]: Socket server started.
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:56 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{98a984d7-07f0-48e6-a9e4-e283f8f99d7e}"
May 13 11:25:56 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:56 Susan-PC sddm[357]: Signal received: SIGTERM
May 13 11:25:56 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{b0363716-469f-420d-8bb2-db337b897121} -background none -noreset -displayfd 18 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[929]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[929]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[929]: [PAM] returning.
May 13 11:25:57 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:57 Susan-PC sddm[357]: Running display setup script "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:57 Susan-PC sddm[357]: Display server started.
May 13 11:25:57 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:57 Susan-PC sddm[357]: Socket server started.
May 13 11:25:57 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:57 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:57 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{b0363716-469f-420d-8bb2-db337b897121}"
May 13 11:25:57 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1: bad "remove" command line
May 13 11:25:57 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2: bad "add" command line
May 13 11:25:57 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:57 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:57 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:57 Susan-PC sddm[357]: Display server stopping...
May 13 11:25:57 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:57 Susan-PC sddm[357]: Running display stop script "/usr/share/sddm/scripts/Xstop"
May 13 11:25:57 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:57 Susan-PC systemd[1]: Stopped Simple Desktop Display Manager.
Seems to be looping due to some errors...
Oh, almost forgot this computer's system specs. They're not very great. Here's a screenfetch:
-`
.o+` root@Susan-PC
`ooo/ OS: Arch Linux
`+oooo: Kernel: i686 Linux 4.16.6-1.0-ARCH
`+oooooo: Uptime: 15m
-+oooooo+: Packages: 362
`/:-:++oooo+: Shell: bash 4.4.19
`/++++/+++++++: CPU: Intel Pentium 4 2.80GHz @ 2.793GHz
`/++++++++++++++: GPU: AMD/ATI RV280 [Radeon 9200 SE]
`/+++ooooooooooooo/` RAM: 36MiB / 2015MiB
./ooosssso++osssssso+`
.oossssso-````/ossssss+`
-osssssso. :ssssssso.
:osssssss/ osssso+++.
/ossssssss/ +ssssooo/-
`/ossssso+/:- -:/+osssso+-
`+sso+:-` `.-/+oso:
`++:. `-/+/
.` `/
Offline
I realized that I installed xf86-video-intel instead of what I needed, xf86-video-ati. Switching to the correct driver showed some progress, a mouse on a black screen, but now after about 5 minutes the screen is still black and the mouse is gone.
I'll be looking into this new issue shortly, and perhaps make another topic, if more appropriate.
Offline
Following https://www.cnet.com/products/dell-dime … -17/specs/ you seem
to have a "Intel Extreme Graphics 2 shared video memory (UMA)" graphic chip.
http://thinkwiki.org/wiki/Intel_Extreme_Graphics_2
I would go in the direction of 'intelfb'.
Offline
Pages: 1