You are not logged in.

Pages: 1

#1 2018-06-23 13:11:34

Cooleech
Member
From: Split, Croatia
Registered: 2018-06-23
Posts: 11

Arch Linux 32 + Xfce + LXDM - keeps logging me out

First of all, hello to everyone here and BIG thanx for keeping 32-bit Arch Linux alive! smile

I made sucessful install of Arch Linux 32 with MATE DE on my EEE laptop few months ago, and I decided to try Xfce DE in QEMU so I could, if everything was ok, give it a try on my small laptop.

That's where problems begin. I've made same installation but with different DE using my script. All went well, no errors occured during installation. But, for some reason, after about 1-2 minutes after logging in, out of nowhere I get logged out. Next log-out is usually much sooner, after 30 seconds up to minute. I tried updating my current installation of Arch Linux on EEE and it works just fine. So, I suspect problem is in QEMU VM.. or not? Can anyone give me any idea what might be wrong?
I'm not QUITE sure, but I think same thing happened a month ago when I tried LXDE installation in QEMU, so I don't think it's Xfce's fault. Could be something with LXDM.. hmm

Thanx in advance!

Petar

Offline

#2 2018-06-23 18:28:28

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 1,197

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

Are you sure it's logging you out?  As in, it's closing all open programs and dropping you back to the DM for logon?  Or it is instead locking the screen, requiring you to type in your password to continue but leaving all programs running in the background?  Neither should happen that frequently, but a full logout seems kind of drastic to me.

In terms of getting to grips with this, have you looked in the logs yet? 'journalctl -b' should get you messages since the last bootup (you may need to run it as root to see all of the messages) and 'dmesg' shows you the kernel messages.

Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#3 2018-06-23 19:25:28

Cooleech
Member
From: Split, Croatia
Registered: 2018-06-23
Posts: 11

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

Yes, it logs me out, doesn't just do screen lock. When I lock screen it gives me notification "logged in", but in this case it just logs me out closing all programs. I tried updating old LXDE instalation and it does the same after update. I tried 'dmesg' but did't find anything wrong with it. I might try 'journalctl -b' later when I get home.

Thanx for your reply! smile

Offline

#4 2018-06-25 11:14:07

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

Do you have any errors in your Xorg.log (either /var/log/Xorg.0.log or /home/<user>/.local/share/xorg/Xorg.0.log?
I had a similar phaenomenon that Xorg was just logging me out for no apparent reason in a QEMU virtual image.
But it was much sooner, after one or two minutes maybe.

Offline

#5 2018-06-25 13:10:46

Cooleech
Member
From: Split, Croatia
Registered: 2018-06-23
Posts: 11

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

levi wrote:

In terms of getting to grips with this, have you looked in the logs yet? 'journalctl -b' should get you messages since the last bootup (you may need to run it as root to see all of the messages) and 'dmesg' shows you the kernel messages.

journalctl -b gives too big output, what am I looking for?
dmesg also gives too big output, and I just have no enough time to explore either since I get logged out pretty soon after logging in.
Is there anything I can grep from those commands that I can do from shell (I made it start as root from GRUB by adding init=/usr/bin/sh)?

andreas_baumann wrote:

Do you have any errors in your Xorg.log (either /var/log/Xorg.0.log or /home/<user>/.local/share/xorg/Xorg.0.log?
I had a similar phaenomenon that Xorg was just logging me out for no apparent reason in a QEMU virtual image.
But it was much sooner, after one or two minutes maybe.

cat /var/log/Xorg.0.log (full):
[    28.796] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[    28.796] Build Operating System: Linux Arch Linux
[    28.797] Current Operating System: Linux archlinux 4.16.6-1.0-ARCH #1 SMP PREEMPT Wed May 2 23:35:27 CEST 2018 i686
[    28.797] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=12301431-b95d-4440-b778-2ff98b922791 rw quiet
[    28.797] Build Date: 01 June 2018  06:52:34AM
[    28.797]  
[    28.797] Current version of pixman: 0.34.0
[    28.797] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    28.797] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.797] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 25 13:36:22 2018
[    28.797] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    28.797] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.797] (==) No Layout section.  Using the first Screen section.
[    28.797] (==) No screen section available. Using defaults.
[    28.797] (**) |-->Screen "Default Screen Section" (0)
[    28.797] (**) |   |-->Monitor "<default monitor>"
[    28.797] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    28.797] (==) Automatically adding devices
[    28.797] (==) Automatically enabling devices
[    28.797] (==) Automatically adding GPU devices
[    28.797] (==) Automatically binding GPU devices
[    28.797] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    28.797] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    28.797] 	Entry deleted from font path.
[    28.798] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    28.798] 	Entry deleted from font path.
[    28.798] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    28.798] 	Entry deleted from font path.
[    28.798] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    28.798] 	Entry deleted from font path.
[    28.798] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    28.798] 	Entry deleted from font path.
[    28.798] (==) FontPath set to:
	/usr/share/fonts/TTF
[    28.798] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.798] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.798] (II) Module ABI versions:
[    28.798] 	X.Org ANSI C Emulation: 0.4
[    28.798] 	X.Org Video Driver: 24.0
[    28.798] 	X.Org XInput driver : 24.1
[    28.798] 	X.Org Server Extension : 10.0
[    28.799] (++) using VT number 1

[    28.799] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    28.799] (II) xfree86: Adding drm device (/dev/dri/card0)
[    28.800] (--) PCI:*(0@0:2:0) 1234:1111:1af4:1100 rev 2, Mem @ 0xfd000000/16777216, 0xfebf4000/4096, BIOS @ 0x????????/131072
[    28.801] (II) LoadModule: "glx"
[    28.801] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.801] (II) Module glx: vendor="X.Org Foundation"
[    28.801] 	compiled for 1.20.0, module version = 1.0.0
[    28.801] 	ABI class: X.Org Server Extension, version 10.0
[    28.801] (==) Matched modesetting as autoconfigured driver 0
[    28.801] (==) Matched fbdev as autoconfigured driver 1
[    28.801] (==) Matched vesa as autoconfigured driver 2
[    28.801] (==) Assigned the driver to the xf86ConfigLayout
[    28.801] (II) LoadModule: "modesetting"
[    28.802] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    28.802] (II) Module modesetting: vendor="X.Org Foundation"
[    28.802] 	compiled for 1.20.0, module version = 1.20.0
[    28.802] 	Module class: X.Org Video Driver
[    28.802] 	ABI class: X.Org Video Driver, version 24.0
[    28.802] (II) LoadModule: "fbdev"
[    28.802] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    28.802] (II) Module fbdev: vendor="X.Org Foundation"
[    28.802] 	compiled for 1.20.0, module version = 0.4.4
[    28.802] 	Module class: X.Org Video Driver
[    28.802] 	ABI class: X.Org Video Driver, version 24.0
[    28.802] (II) LoadModule: "vesa"
[    28.802] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    28.802] (II) Module vesa: vendor="X.Org Foundation"
[    28.802] 	compiled for 1.20.0, module version = 2.4.0
[    28.802] 	Module class: X.Org Video Driver
[    28.802] 	ABI class: X.Org Video Driver, version 24.0
[    28.802] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    28.802] (II) FBDEV: driver for framebuffer: fbdev
[    28.802] (II) VESA: driver for VESA chipsets: vesa
[    28.802] (II) modeset(0): using drv /dev/dri/card0
[    28.802] (WW) Falling back to old probe method for fbdev
[    28.802] (II) Loading sub module "fbdevhw"
[    28.802] (II) LoadModule: "fbdevhw"
[    28.802] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    28.802] (II) Module fbdevhw: vendor="X.Org Foundation"
[    28.802] 	compiled for 1.20.0, module version = 0.0.2
[    28.802] 	ABI class: X.Org Video Driver, version 24.0
[    28.802] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    28.802] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    28.802] (==) modeset(0): RGB weight 888
[    28.802] (==) modeset(0): Default visual is TrueColor
[    28.802] (II) Loading sub module "glamoregl"
[    28.802] (II) LoadModule: "glamoregl"
[    28.803] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    28.807] (II) Module glamoregl: vendor="X.Org Foundation"
[    28.807] 	compiled for 1.20.0, module version = 1.0.1
[    28.807] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    28.859] (II) modeset(0): glamor X acceleration enabled on llvmpipe (LLVM 6.0, 128 bits)
[    28.859] (II) modeset(0): glamor initialized
[    28.859] (II) modeset(0): Output Virtual-1 has no monitor section
[    28.860] (II) modeset(0): EDID for output Virtual-1
[    28.860] (II) modeset(0): Printing probed modes for output Virtual-1
[    28.860] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[    28.860] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[    28.860] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    28.860] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    28.860] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    28.860] (II) modeset(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    28.860] (II) modeset(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    28.860] (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    28.860] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    28.860] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    28.860] (II) modeset(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[    28.860] (II) modeset(0): Modeline "1366x768"x60.0   72.00  1366 1380 1436 1500  768 769 772 800 +hsync +vsync (48.0 kHz e)
[    28.860] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x768"x60.0   68.25  1280 1328 1360 1440  768 771 778 790 +hsync -vsync (47.4 kHz e)
[    28.860] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    28.860] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    28.860] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    28.860] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    28.860] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    28.860] (II) modeset(0): Output Virtual-1 connected
[    28.860] (II) modeset(0): Using exact sizes for initial modes
[    28.860] (II) modeset(0): Output Virtual-1 using initial mode 1024x768 +0+0
[    28.860] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    28.860] (==) modeset(0): DPI set to (96, 96)
[    28.860] (II) Loading sub module "fb"
[    28.860] (II) LoadModule: "fb"
[    28.860] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.860] (II) Module fb: vendor="X.Org Foundation"
[    28.860] 	compiled for 1.20.0, module version = 1.0.0
[    28.860] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    28.860] (II) UnloadModule: "fbdev"
[    28.860] (II) Unloading fbdev
[    28.860] (II) UnloadSubModule: "fbdevhw"
[    28.860] (II) Unloading fbdevhw
[    28.860] (II) UnloadModule: "vesa"
[    28.860] (II) Unloading vesa
[    28.886] (==) modeset(0): Backing store enabled
[    28.886] (==) modeset(0): Silken mouse disabled
[    28.887] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    28.887] (==) modeset(0): DPMS enabled
[    28.887] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x1234 / 0x1111
[    28.887] (EE) modeset(0): Failed to initialize the DRI2 extension.
[    28.887] (II) Initializing extension Generic Event Extension
[    28.887] (II) Initializing extension SHAPE
[    28.887] (II) Initializing extension MIT-SHM
[    28.887] (II) Initializing extension XInputExtension
[    28.887] (II) Initializing extension XTEST
[    28.888] (II) Initializing extension BIG-REQUESTS
[    28.888] (II) Initializing extension SYNC
[    28.888] (II) Initializing extension XKEYBOARD
[    28.888] (II) Initializing extension XC-MISC
[    28.888] (II) Initializing extension SECURITY
[    28.888] (II) Initializing extension XFIXES
[    28.889] (II) Initializing extension RENDER
[    28.889] (II) Initializing extension RANDR
[    28.889] (II) Initializing extension COMPOSITE
[    28.889] (II) Initializing extension DAMAGE
[    28.889] (II) Initializing extension MIT-SCREEN-SAVER
[    28.890] (II) Initializing extension DOUBLE-BUFFER
[    28.890] (II) Initializing extension RECORD
[    28.890] (II) Initializing extension DPMS
[    28.890] (II) Initializing extension Present
[    28.890] (II) Initializing extension DRI3
[    28.890] (II) Initializing extension X-Resource
[    28.890] (II) Initializing extension XVideo
[    28.891] (II) Initializing extension XVideo-MotionCompensation
[    28.891] (II) Initializing extension GLX
[    28.891] (II) AIGLX: Screen 0 is not DRI2 capable
[    28.893] (II) IGLX: Loaded and initialized swrast
[    28.893] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    28.893] (II) Initializing extension XFree86-VidModeExtension
[    28.893] (II) Initializing extension XFree86-DGA
[    28.893] (II) Initializing extension XFree86-DRI
[    28.893] (II) Initializing extension DRI2
[    28.894] (II) modeset(0): Damage tracking initialized
[    28.894] (II) modeset(0): Setting screen physical size to 270 x 203
[    28.973] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    28.973] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.973] (**) Power Button: Applying InputClass "system-keyboard"
[    28.973] (II) LoadModule: "libinput"
[    28.973] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    28.975] (II) Module libinput: vendor="X.Org Foundation"
[    28.975] 	compiled for 1.19.6, module version = 0.27.1
[    28.975] 	Module class: X.Org XInput Driver
[    28.975] 	ABI class: X.Org XInput driver, version 24.1
[    28.975] (II) Using input driver 'libinput' for 'Power Button'
[    28.975] (**) Power Button: always reports core events
[    28.975] (**) Option "Device" "/dev/input/event0"
[    28.975] (**) Option "_source" "server/udev"
[    28.976] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    28.976] (II) event0  - Power Button: device is a keyboard
[    28.976] (II) event0  - Power Button: device removed
[    29.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[    29.001] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.001] (**) Option "xkb_model" "pc105"
[    29.001] (**) Option "xkb_layout" "hr"
[    29.001] (WW) Option "xkb_variant" requires a string value
[    29.027] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    29.027] (II) event0  - Power Button: device is a keyboard
[    29.028] (II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/event2)
[    29.028] (**) QEMU QEMU USB Tablet: Applying InputClass "libinput pointer catchall"
[    29.028] (II) Using input driver 'libinput' for 'QEMU QEMU USB Tablet'
[    29.028] (**) QEMU QEMU USB Tablet: always reports core events
[    29.028] (**) Option "Device" "/dev/input/event2"
[    29.028] (**) Option "_source" "server/udev"
[    29.084] (II) event2  - QEMU QEMU USB Tablet: is tagged by udev as: Mouse
[    29.084] (II) event2  - QEMU QEMU USB Tablet: device is a pointer
[    29.084] (II) event2  - QEMU QEMU USB Tablet: device removed
[    29.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3/event2"
[    29.147] (II) XINPUT: Adding extended input device "QEMU QEMU USB Tablet" (type: MOUSE, id 7)
[    29.147] (**) Option "AccelerationScheme" "none"
[    29.147] (**) QEMU QEMU USB Tablet: (accel) selected scheme none/0
[    29.147] (**) QEMU QEMU USB Tablet: (accel) acceleration factor: 2.000
[    29.147] (**) QEMU QEMU USB Tablet: (accel) acceleration threshold: 4
[    29.204] (II) event2  - QEMU QEMU USB Tablet: is tagged by udev as: Mouse
[    29.204] (II) event2  - QEMU QEMU USB Tablet: device is a pointer
[    29.205] (II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/js0)
[    29.205] (II) No input driver specified, ignoring this device.
[    29.205] (II) This device may have been added with another device file.
[    29.206] (II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/mouse0)
[    29.206] (II) No input driver specified, ignoring this device.
[    29.206] (II) This device may have been added with another device file.
[    29.207] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[    29.207] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    29.207] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    29.207] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    29.207] (**) AT Translated Set 2 keyboard: always reports core events
[    29.207] (**) Option "Device" "/dev/input/event1"
[    29.207] (**) Option "_source" "server/udev"
[    29.208] (II) event1  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    29.208] (II) event1  - AT Translated Set 2 keyboard: device is a keyboard
[    29.208] (II) event1  - AT Translated Set 2 keyboard: device removed
[    29.240] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[    29.240] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[    29.240] (**) Option "xkb_model" "pc105"
[    29.240] (**) Option "xkb_layout" "hr"
[    29.240] (WW) Option "xkb_variant" requires a string value
[    29.241] (II) event1  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    29.241] (II) event1  - AT Translated Set 2 keyboard: device is a keyboard
[    29.242] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event5)
[    29.242] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall"
[    29.242] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse'
[    29.242] (**) VirtualPS/2 VMware VMMouse: always reports core events
[    29.242] (**) Option "Device" "/dev/input/event5"
[    29.242] (**) Option "_source" "server/udev"
[    29.243] (II) event5  - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[    29.243] (II) event5  - VirtualPS/2 VMware VMMouse: device is a pointer
[    29.243] (II) event5  - VirtualPS/2 VMware VMMouse: device removed
[    29.306] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[    29.306] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 9)
[    29.307] (**) Option "AccelerationScheme" "none"
[    29.307] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0
[    29.307] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000
[    29.307] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4
[    29.308] (II) event5  - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[    29.308] (II) event5  - VirtualPS/2 VMware VMMouse: device is a pointer
[    29.308] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse2)
[    29.308] (II) No input driver specified, ignoring this device.
[    29.308] (II) This device may have been added with another device file.
[    29.309] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event4)
[    29.309] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall"
[    29.309] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse'
[    29.309] (**) VirtualPS/2 VMware VMMouse: always reports core events
[    29.309] (**) Option "Device" "/dev/input/event4"
[    29.309] (**) Option "_source" "server/udev"
[    29.310] (II) event4  - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[    29.310] (II) event4  - VirtualPS/2 VMware VMMouse: device is a pointer
[    29.310] (II) event4  - VirtualPS/2 VMware VMMouse: device removed
[    29.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event4"
[    29.360] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 10)
[    29.360] (**) Option "AccelerationScheme" "none"
[    29.360] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0
[    29.360] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000
[    29.360] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4
[    29.361] (II) event4  - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse
[    29.361] (II) event4  - VirtualPS/2 VMware VMMouse: device is a pointer
[    29.361] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1)
[    29.361] (II) No input driver specified, ignoring this device.
[    29.361] (II) This device may have been added with another device file.
[    29.362] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    29.362] (II) No input driver specified, ignoring this device.
[    29.362] (II) This device may have been added with another device file.
[    29.735] (II) modeset(0): Disabling kernel dirty updates, not required.
[    60.186] (II) event0  - Power Button: device removed
[    60.248] (II) event2  - QEMU QEMU USB Tablet: device removed
[    60.281] (II) event1  - AT Translated Set 2 keyboard: device removed
[    60.356] (II) event5  - VirtualPS/2 VMware VMMouse: device removed
[    60.399] (II) event4  - VirtualPS/2 VMware VMMouse: device removed
[    60.437] (II) UnloadModule: "libinput"
[    60.437] (II) UnloadModule: "libinput"
[    60.437] (II) UnloadModule: "libinput"
[    60.438] (II) UnloadModule: "libinput"
[    60.438] (II) UnloadModule: "libinput"
[    60.448] (II) Server terminated successfully (0). Closing log file.
cat /var/log/Xorg.0.log | grep EE:
[    28.797] Current Operating System: Linux archlinux 4.16.6-1.0-ARCH #1 SMP PREEMPT Wed May 2 23:35:27 CEST 2018 i686
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.887] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x1234 / 0x1111
[    28.887] (EE) modeset(0): Failed to initialize the DRI2 extension.
[    28.889] (II) Initializing extension MIT-SCREEN-SAVER
QEMU cmd line:
qemu-system-x86_64 -enable-kvm -M pc -usbdevice tablet -hda "/home/<user>/Arch Linux LXDE 32 bit/Arch Linux LXDE 32 bit.raw" -cdrom "" -smp cores=2,threads=2 -soundhw hda -boot c -net nic -net user -m 666 -rtc base=localtime

P.S. As funny as it sounds, I think that moving mouse causes logging out. When I'm not touching the mouse, it works fine (did more than 5 minutes without logging out, and as soon as I keep moving mouse, problem occures in matter of seconds).

Offline

#6 2018-06-26 04:15:36

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 1,197

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

In terms of dmesg and journalctl if you run them straight after the problem happens, the pertinent information will generally be at the end.  That tends to happen by default with dmesg provided you don't pipe them into anything, but with journalctl you'll need to scroll to the very bottom, or just press capital G once.  I'm not sure there's anything you can grep, because I just normally look at the end and see what it says.

Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#7 2018-06-26 07:08:50

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

So, cirrus is the standard VGA adapter for QEMU? I would try 'vga std' as it should provide Bochs DRM, maybe this is more stable.

Offline

#8 2018-06-28 02:15:02

Cooleech
Member
From: Split, Croatia
Registered: 2018-06-23
Posts: 11

Re: Arch Linux 32 + Xfce + LXDM - keeps logging me out

andreas_baumann wrote:

So, cirrus is the standard VGA adapter for QEMU?

Not quite, according to man:

cirrus
               Cirrus Logic GD5446 Video card. All Windows versions starting from Windows 95 should recognize and use this graphic card. For optimal performances, use 16 bit color depth in the guest and the host OS.  (This card was the default before QEMU 2.2)


std
               Standard VGA card with Bochs VBE extensions.  If your guest OS supports the VESA 2.0 VBE extensions (e.g. Windows XP) and if you want to use high resolution modes (>= 1280x1024x16) then you should use this option.  (This card is the default since QEMU 2.2)

andreas_baumann wrote:

I would try 'vga std' as it should provide Bochs DRM, maybe this is more stable.

I'll try putting -vga std switch to qemu and see if that makes any difference. wink Thanx for your suggestion! smile

Offline

Pages: 1

Board footer

Powered by FluxBB