You are not logged in.
Hello !
Running Stellarium gives me a Segmentation fault error. Where I should start solving this ?
$ stellarium
-----------------------------------------------------
[ This is Stellarium 0.21.0 - https://stellarium.org/ ]
[ Copyright (C) 2000-2021 Fabien Chereau et al. ]
-----------------------------------------------------
Writing log file to: "/home/mocambo/.stellarium/log.txt"
File search paths:
0 . "/home/mocambo/.stellarium"
1 . "/usr/share/stellarium"
Attempting to use an existing older config file.
Clear cache and update config.ini...
Config file is: "/home/mocambo/.stellarium/config.ini"
Default surface format: QSurfaceFormat(version 2.0, options QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize -1, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize -1, samples -1, swapBehavior QSurfaceFormat::DefaultSwapBehavior, swapInterval 1, colorSpace QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
Desired surface format: QSurfaceFormat(version 2.1, options QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize 24, redBufferSize 8, greenBufferSize 8, blueBufferSize 8, alphaBufferSize 8, stencilBufferSize 8, samples -1, swapBehavior QSurfaceFormat::DefaultSwapBehavior, swapInterval 1, colorSpace QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
StelGLWidget constructor
StelGraphicsScene constructor
Xlib: sequence lost (0x101c2 > 0x1c4) in reply type 0x0!
Xlib: sequence lost (0x101d1 > 0x1d3) in reply type 0x0!
Xlib: sequence lost (0x101d6 > 0x1d8) in reply type 0x0!
initializeGL
OpenGL supported version: "1.4 Mesa 20.3.4"
Current Format: QSurfaceFormat(version 1.4, options QFlags<QSurfaceFormat::FormatOption>(DeprecatedFunctions), depthBufferSize 24, redBufferSize 8, greenBufferSize 8, blueBufferSize 8, alphaBufferSize 8, stencilBufferSize 8, samples 0, swapBehavior QSurfaceFormat::DefaultSwapBehavior, swapInterval 1, colorSpace QSurfaceFormat::DefaultColorSpace, profile QSurfaceFormat::NoProfile)
StelMainView::init
Detected: OpenGL "1.4"
Driver version string: "1.4 Mesa 20.3.4"
GL vendor is "Intel Open Source Technology Center"
GL renderer is "Mesa DRI Intel(R) 915GM x86/MMX/SSE2"
Oops... Insufficient OpenGL version. Please update drivers, or graphics hardware.
Segmentation fault (core dumped)# lspci | grep "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
microcode : 0x20
cpu MHz : 800.018
cache size : 2048 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts cpuid est tm2
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 1600.70
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management:$ uname -a
Linux archlinux 5.11.10-arch1-1.0 #1 SMP PREEMPT Sat, 27 Mar 2021 21:02:14 +0000 i686 GNU/Linux# pacman -Qi xf86-video-intel
Name : xf86-video-intel
Version : 1:2.99.917+916+g31486f40-1.0
Description : X.org Intel i810/i830/i915/945G/G965+ video drivers
Architecture : i686
URL : https://01.org/linuxgraphics
Licenses : custom
Groups : xorg-drivers
Provides : xf86-video-intel-uxa xf86-video-intel-sna
Depends On : mesa libxvmc pixman xcb-util>=0.3.9 systemd-libs
Optional Deps : libxrandr: for intel-virtual-output [installed]
libxinerama: for intel-virtual-output [installed]
libxcursor: for intel-virtual-output [installed]
libxtst: for intel-virtual-output [installed]
libxss: for intel-virtual-output [installed]
Required By : None
Optional For : None
Conflicts With : xorg-server<1.20 X-ABI-VIDEODRV_VERSION<24 X-ABI-VIDEODRV_VERSION>=25 xf86-video-intel-sna xf86-video-intel-uxa xf86-video-i810 xf86-video-intel-legacy
Replaces : xf86-video-intel-uxa xf86-video-intel-sna
Installed Size : 2.30 MiB
Packager : Andreas Baumann <mail@andreasbaumann.cc>
Build Date : Sat 16 Jan 2021 06:49:05 PM EET
Install Date : Wed 07 Apr 2021 08:59:43 PM EEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : SignatureLast edited by mocambo (2021-04-17 13:56:48)
Offline
It states your GPU is too old first and then crashes. I guess it's not too important to the developer once it informs you why it can't run.
Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.
Offline